changelog.docu

/** \page om_changelog Changelog

\htmlonly

<table border=1 cellpadding=4 cellspacing=2>

<!-- --------------------------------------------------------------------- -->


<tr valign=top><td><b>7.2</b> (?/?/?)</td><td>

<b>Core</b>
<ul>
<li>TriConnectivity: Added two functions split_edge and split_edge_copy to mask the PolyConnectivity functions of the same name (Prevents creation of valence 2 vertices on trimeshes)</li>
</ul>

<b>IO</b>
<ul>
<li>PLY Reader: Allowing the PLY reader to read custom face ( Thanks to morgan Leborgne for the patch)</li>
<li>PLY Reader: Fixed endless loop on unknown property list type</li>
</ul>

<b>Tools</b>
<ul>
<li>SmartTagger: Added the SmartTagger class to tag primitives (O(1) reset )</li>
</ul>

<b>Build System</b>
<ul>
<li>Rename the DEPRECATED macro into OM_DEPRECATED to prevent a macro clash with Intel MKL (Thanks to Morgan Leborgne for the patch)</li>
</ul>


</tr>


<tr valign=top><td><b>7.1</b> (2018/05/29)</td><td>

<b>IO</b>
<ul>
<li>OBJ Reader: Fixed slow OBJ reader (Thanks to Etienne Danvoye for the patch) </li>
</ul>

<b>Documentation</b>
<ul>
<li>Updated build instructions.</li>
</ul>

<b>Build System</b>
<ul>
<li>Default to C++11 in cmake files</li>
<li>Remove old qmake project files. Unmaintained for a very long time</li>
<li>Replaced Qt finders</li>
<li>Added VS 2017 to CI builds</li>
</ul>

</tr>



<tr valign=top><td><b>7.0</b> (2018/04/19)</td><td>

<b>Breaking changes</b>
<ul>
<li>The minimal standard for C++ has been raised to C++11. Compilers not supporting C++11 or higher are no longer supported</li>
<li>Removed the python bindings from this project. They have migrated to a <a href="https://www.graphics.rwth-aachen.de:9000/OpenMesh/openmesh-python">seperate project</a>.</li>
</ul>

<b>Core</b>
<ul>
<li>Implemented a cast from polyMesh to Mesh and vice versa using static_cast(polymeshInstance) or static_cast(trimeshInstance)</li>
<li>make all negative handles invalid, not just -1</li>
<li>Several warnings fixed (Including the checked iterators)</li>
<li>split_copy and split_edge_copy operations now also copy internal properties.</li>
<li>copy face properties in split_copy(EdgeHandle, VertexHandle)</li>
<li>fix halfedge indices in OpenMeshTrimeshCirculatorHalfedgeLoop CWAndCCWCheck</li>
<li>Fix wrong behaviour of HalfedgeLoopIterators by changing the template parameter</li>
<li>Added 1-4 triangle split funtion(splits all edges at Midpoints)</li>
<li>Boost range support (Thanks to Bastian Pranzas for the patch)</li>
<li>Made the face and edge split operations that copy properties also copy builtin properties</li>
<li>calc_sector_angle: Check for real division by zero not with epsilon that was way to large</li>
<li>Don't return invalid iterators for empty element ranges</li>
<li>Mark halfedges as deleted after collapse</li>
<li>Let default range-based for skip deleted elements and add a version that includes deleted elements</li>
<li>Moved length() by norm() to external functions. This allows us to support other vector types instead of Vec3d (e.g. via Eigen) </li>
</ul>

<b>Utils</b>
<ul>
<li>enable c++11 features of many classes for Visual Studio 2013</li>
<li>Fixed broken version macros (Thanks to Frederik Salomonsson for the fix)</li>
<li>Fixed Build on gcc-7.2 (Thanks to Gero Müller and Martial Tola for the patches)</li>
<li>Small compilation fix for MINGW64 cross-compilation(Thanks to Manuel Massing for the patch)</li>
</ul>

<b>Tools</b>
<ul>
<li>Subdivider: New Midpoint subdivision scheme</li>
<li>Subdivider: Use double as default type</li>
</ul>

<b>Geometry</b>
<ul>
<li>QuadricT: implement Q+Q and Q*scalar operators for convenience.</li>
<li>Vector11T: Make converting ctor only accept 2 arguments</li>
<li>Only compute normals for faces that are not deleted</li>
</ul>


<b>IO</b>
<ul>
<li>ImporterT: Modified the add_face function of importerT to always return a valid FaceHandle</li>
<li>ImporterT: Return a valid FaceHandle when adding non-manifold faces.</li>
<li>BaseExporter: Added accessor functions for HalfEdgeHandles and faceTexCoords to base exporter and exporter template.</li>
<li>OBJ Writer: Fail if vertex color export was requested (Thanks to Manuel Massing)</li>
<li>OBJ Writer: Added functionality to store FaceTexCoords to objwriter</li>
<li>OBJ Writer: Applied fix for bad or missing vertex tex coords (Thanks to Gero Müller for the patch)</li>
<li>OBJ Writer: Fix vertex texture coordinates export in OBJ writer</li>
<li>OBJ Loader: range check for vertex colors and normals in OBJ loader</li>
<li>OBJ Loader: fixed handling of negative indices in OBJ loader</li>
<li>OM Writer: Fixed OMWriter when no faces are available (Thanks to Jamie Kydd for the patch)</li>
<li>OM Writer: Added Mark to the format header to identify end of stream correctly (Thanks to Jamie Kydd for the patch)</li>
<li>PLY Reader: Skip reading extra elements after face</li>
<li>PLY Reader: Return error when reaching EOF</li>
<li>OMFormat: Fix implicit fallthrough warning on gcc(Thanks to Manuel Massing for the patch)</li>
</ul>

<b>Unittests</b>
<ul>
<li>Added unittest to write and read faceTexcoords with a test obj file</li>
<li>Added unittest for split_edge_copy operations on Tri and PolyMeshes</li>
</ul>

<b>General</b>
<ul>
<li>Updated Logo</li>
<li>Only Issue Warning if compile Order for MeshIO.hh is violated. Check will be removed if no errors are reported.</li>
</ul>

</tr>



<tr valign=top><td><b>6.3</b> (2016/10/04)</td><td>

<b>Core</b>
<ul>
<li>Fixed type pun warning with gcc-6</li>
<li>Fixed incorrect type of hash function for boost causing a warning with clang</li>
<li>gcc 4.7 fix</li>
</ul>

<b>IO</b>
<ul>
<li>STL Reader: Identify stl files containing solid keyword as ASCII type</li>
<li>Importer: Failed faces will be added on the fly now to correctly handle properties on them.</li>
</ul>

<b>Utils</b>
<ul>
<li>PropertyManager: Add C++11 range-based set_range() version.</li>
<li>PropertyManager: Add initializing createIfNotExists() versions.</li>
</ul>

<b>General</b>
<ul>
<li>Fixed undefined MSVC macro warning (Thanks to Xan for the patch)</li> 
</ul>

<b>Python</b>
<ul>
<li>Added link directories and log file to build system</li>
<li>Made member function pointer types explicit. This gets rid of a preprocessor conditional and prevents bug in msvc.</li>
</ul>

<b>Unittests</b>
<ul>
<li>Added unittest to trigger gcc alignment bug</li>
</ul>

<b>Documentation</b>
<ul>
<li>Updated documentation of BaseKernel's property functions to hint at PropertyManager.</li>
</ul>

<b>Build System</b>
<ul>
<li>Removed unnecessary include dir from Core Cmakelist (Thanks to Xan for the patch)</li>
<li>Added a little safeguard against GCC optimizer bug to CMakeLists.txt</li>
</ul>

</tr>

<tr valign=top><td><b>6.2</b> (2016/07/11)</td><td>

<b>General</b>
<ul>
<li>Fixed build error with Visual Studio 2015 Update 3 (Fixed VS2015 Update 3 build error)</li>
</ul>

<b>Build System</b>
<ul>
<li>Fixed mingw compilataion error</li>
</ul>

<b>General</b>
<ul>
<li>Added size_t hash_value functions to support boost unordered_set and map</li>
</ul>


</tr>

<tr valign=top><td><b>6.1</b> (2016/05/31)</td><td>

<b>General</b>
<ul>
<li>New logo for OpenMesh and switched to VCI schema</li>
<li>Fix Internal Compiler Error in Visual Studio 2015 Community edition (Enterprise version does not trigger this error)</li>
</ul>

<b>Core</b>
<ul>
<li>PolyMesh: Copy per-halfedge and per-face properties to new elments during triangulation (Thanks to Max Limper for the patch)</li>
</ul>

<b>IO</b>
<ul>
<li>PLY Reader: Handle nr newlines (Thanks to Christian Feurer for the patch)</li>
<li>PLY Reader: Fixed binary reader errors in ply reader. (Thanks to Michael Kremer for the patch)</li>
<li>Throw error when no readers are available (Thanks to Christian Feurer for the patch)</li>
</ul>

<b>Build System</b>
<ul>
<li>Some fixes for min gw (Thanks to Xan for the patch)</li>
<li>Several changes to support mingw on windows again. (Thanks to Christian Feurer for the patches).</li>
</ul>

<b>Infrastructure</b>
<ul>
<li>Build drag and drop installer for Mac in Daily Builds</li>
</ul>

<b>Documentation</b>
<ul>
<li>Move documentation of PropertyManager factory functions to PropertyManager Doxygen page</li>
</ul>


</tr>


<tr valign=top><td><b>6.0</b> (2016/29/04)</td><td>

<b>Core</b>
<ul>
<li>Added a couple of methods to enable more efficient adding of batches of vertices (Without resizing property vectors) </li>
</ul>

<b>IO</b>
<ul>
<li>Obj reader: added texCoord3d functions to objloader</li>
<li>PLY Reader: Don't emit warning for every complex face but warn only once in the end.</li>
<li>Importer: Integrate non-manifold faces while importing and not at the end. Fixes missing properties on non-manifolds. (Thanks to Max Limper for the patch, Merge Request 51)</li>
</ul>

<b>VectorT</b>
<ul>
<li>Full C++11 rewrite of VectorT (Keeping C++98 backward compatibility)</li>
<li>Split VectorT implementation into two files (One c++98 and one c++11)</li>
<li>Added += operator to mesh iterators (C++11 only) </li>
</ul>

<b>Unittests</b>
<ul>
<li>Added several unittests for VectorT</li>
<li>Added Benchmarks for VectorT</li>
<li>Added test for property iterators</li>
</ul>

<b>Build System</b>
<ul>
<li>Updated c++11 ifdefs to use c++11 (starting with VS1015)</li>
</ul>

<b>Python Interface</b>
<ul>
<li>Fixed segfault in decimater due to a bad pointer</li>
</ul>

<b>Utils</b>
<ul>
<li>Add factory functions for creating PropertyManagers without restating the mesh type in C++11</li>
</ul>


<b>Apps</b>
<ul>
<li>VDPM Analyzer: Fixed VS2015 internal compiler error with C++11</li>
</ul>

</tr>


<tr valign=top><td><b>5.2</b> (2016/04/28)</td><td>

<b>Core</b>
<ul>
<li>Fixed ugly typo in __decrement function of Basehandle. Seems to be unused in the rest of the code.</li>
<li>drop VectorDimensionsT metaprogram in favor of vector_traits in normal computation function</li>
</ul>


<b>IO</b>
<ul>
<li>PLY Reader: Fixed CR LF newline handling for binary file headers.</li>
<li>Obj writer: Fix OBJ material files and face color (Thanks to Sven-Kristofer Pilz for the patch) </li>
<li>Obj writer: Fix OBJ writer bug file extension removal (Thanks to Katharina Breininger for the patch) </li>

</ul>

<b>Tools</b>
<ul>
<li>Decimater: Added missing preprocess collapse call in size_t DecimaterT<Mesh>::decimate(size_t _n_collapses)  (Thanks to Andrej Ivanis for the hint)</li>
</ul>



<b>Build System</b>
<ul>
<li>Fixed Typo in cmake install for smoother (Thanks to Takashi Michikawa for the fix).</li>
</ul>

<b>Documentation</b>
<ul>
<li>Fixed order of smoother parameters in the documentation. (Thanks to Takashi Michikawa for the info).</li>
</ul>

</tr>


<tr valign=top><td><b>5.1</b> (2015/17/12)</td><td>

<b>Core</b>
<ul>
<li>Added clean_keep_reservation() (remove all elements from the mesh but keeps the properties. In contrast to clean() the memory used for the elements will remain allocated</li>
<li>Reduced number of include statements to speedup compilation</li>
<li>Removed unused member variable next_cache_count_ member of PolyConnectivity and made it local</li>
</ul>

<b>General</b>
<ul>
<li>Fixed bug preventing from building with 2 dimensional vectors (e.g. vec2i) </li>
<li>Heap: Minor cleanup (some consts)</li>
<li>Added static versions of ArrayKernel::edge_handle and ...::halfedge_handle</li>
<li>Reduced number of includes</li>
</ul>

<b>IO</b>
<ul>
<li>OMWriter: fix crash in OMWriter when writing an empty mesh with colors</li>
<li>Binary writers: Fixed double swap in string specialization. Added Unittest.</li>
</ul>

<b>VectorT</b>
<ul>
<li>take VectorT argument by reference for non-member vector scalar multiplication</li>
</ul>

<b>Unittests</b>
<ul>
<li>Added some basic linear algebra tests for VectorT</li>
<li>Added tests for vec2x construction</li>
</ul>

<b>Documentation</b>
<ul>
<li>Add some more documentation about primitive deletion. Closes #14</li>
</ul>

<b>Build System</b>
<ul>
<li>Fixed missing debug dll for autobuilders</li>
</ul>

<b>Python Interface</b>
<ul>
<li>Exposed Decimater to python</li>
</ul>

</tr>



<tr valign=top><td><b>5.0</b> (2015/11/18)</td><td>

<b>General</b>
<ul>
<li>Moved repository to git</li>
</ul>

<b>Core</b>
<ul>
<li>Fixed bug where range iterators contained an invalid element when the range was empty</li>
<li>Reintroduced and polished the StatusSet API (Thanks to Martin Marinov)</li>
<li>More efficient implementation of opposite_halfedge_handle (Less instructions required)</li>
<li>PolyMeshes: More robust algorithm for computing surface normals (Fixes bad normals on concave polygons)</li>
</ul>

<b>VectorT</b>
<ul>
<li>Modernized VectorT constructors for C++11 (Less redundancy, make some of the VectorT constructors constexpr)</li>
<li>C++11: Added _htmlColor literal operator.</li>
<li>C++11: Added explicit static_cast along with static SFINAE checks to VectorT constructor.</li>
</ul>

<b>IO</b>
<ul>
<li>loaded properties are presistant per default</li>
<li>remove unnecessary c headers</li>
<li>PLY Writer: fix crash when saving a mesh and a custom property was removed before, extend unittest for this case</li>
<li>PLY Writer: add custom property (with pod data type) support for binary ply files closes #2496</li>
<li>remove redundant code refs #2525</li>
<li>Off Writer: Removed redundant code</li>
<li>Made STLReader, OBJReader reuse stringstreams to improve performance</li>
</ul>

<b>Unittests</b>
<ul>
<li>add obj writer unittest</li>
<li>add unittest for write stla</li>
<li>Fixed bug where Some C++11 unittests were not build and used</li>
<li>Added more unittests c++11 ranges vvrange and vertexrange</li>
</ul>


</tr>


<tr valign=top><td><b>4.1</b> (2015/07/27,Rev.1318)</td><td>
<b>Core</b>
<ul>
<li>Fixed bug in polymesh normal computation. Added more unittests for normal computation.</li>
<li>Get rid of some windows preprocessor warnings</li>
</ul>

<b>IO</b>
<ul>
<li>Options: Fixed bad enum</li>
</ul>


<b>Build System</b>
<ul>
<li>Removed fixbundle calls if not building apps.</li>
</ul>

</tr>


<tr valign=top><td><b>4.0</b> (2015/07/08,Rev.1308)</td><td>

<b>LICENSE</b>
<ul>
<li>OpenMesh has been relicensed to BSD-3</li>
</ul>

<b>Core</b>
<ul>
<li>Fixed crash when writing with multiple threads to mostream. closes #2293 (Note: This fix is only active with C++11 support) </li>
<li>fix "relink failed" condition closes #1244. This patch fixes a rare condition in add_face, where a non-manifold configuration could be created. </li>
<li>Added CW and CCW Circulators ( These new iterator versions also fix the problems that circulators could get valid again, if iterating past the end,
    they are also faster, as the require one check less then the old ones.)</li>
<li>Implement a warning on the operator-- of the old iterators. It was possible to use them to iterate from begin into negative direction. At boundaries,
    that did not work correctly and visited one entity twice. The warning can be disabled via cmake or define (-DNO_DECREMENT_DEPRECATED_WARNINGS ).</li>
<li>Fixed wrong normal calculation in calc_face_normal for Poly Meshes. closes #2427</li>
<li>Fixed various warnings with vector casts</li>
<li>General: Get rid of some compiler warnings</li>
<li>VectorT: fix compile error on vector scalar multiplication when scalar type differs of vector scalar type and the scalar was lhs. closes #2367</li>
<li>Removed dead and uncompilable code regarding the status set. refs #2511 </li>
</ul>

<b>IO</b>
<ul>
<li>Readers/Writers: extend "can_read/can_write" function. returns true, if no explicit filename is given, but just the extension. closes #2431 </li>
<li>Writers: Avoid std::endl in various writers to avoid flushing the output stream on every line. (Thanks to Roman Zoller for the hint).</li>
<li>OBJReader: fix reading mtl files with texture only for obj files</li>
<li>OBJReader: fix crash, if obj file contains degenerated faces</li>
<li>OBJReader: improve performance for small vectors/faces</li>
<li>OBJReader: load vertex color values as float in range of [0..1] instead of integers [0..255]</li>
<li>PLY Reader: Ascii reader now supports custom attributes</li>
<li>PLY Writer: add custom property support for ascii version</li>
<li>PLY Reader: unify int8_t/signed char/char in ply reader and writer. </li>
<li>PLY Reader/Writer Binary: change type int8_t to signed char from type char closes #2499 </li>
<li>STL Writer: Add a space after the solid keyword to make some readers happy. </li>
</ul>

<b>Utils</b>
<ul>
<li>Fixing PropertyManager so that it cooperates with bool properties even on unforgiving implementations (such as clang).</li>
</ul>


<b>Tools</b>
<ul>
<li>Don't use auto_ptr when compiler supports C++11. Replaced by unique_ptr.</li>
<li>Fix for Smoother set_relative error (Thanks to Leonardo Cecchinato for the fix) </li>
<li>Improved SmootherT.hh Documentation</li>
<li>Fixed old OM3 port warning in smoother</li>
<li>Decimater: ModProgMesh - Fixed write on 64-bit systems</li>
</ul>

<b>General</b>
<ul>
<li>Fixed various build warnings</li>
<li>Moved several iostream includes to cc files or removed them where not necessary (or switched to omlog and omerr)</li>
</ul>

<b>Documentation</b>
<ul>
<li>Example for locking vertices in decimater</li>
<li>Added extra hint about status flags when collapsing edges</li>
<li>Updated tutorial on reading and writing meshes with python bindings</li>
<li>Updated the tutorial with further information on how to build the python bindings</li>
<li>Added missing requestsfor polyMesh in collapsee docu</li>
<li>Add feature support list for readers/writers</li>
<li>add info about requesting standard properties and loading a mesh with options - refs #2512</li>
<li>add info about texture information in OBJ file format - closes #2369</li>
<li>add info about texture index property refs #2512</li>
</ul>

<b>Unittests</b>
<ul>
<li>fixed a bug in the unit test test_add_face.py</li>
<li>Added tests for tutorials about flip and collapse</li>
<li>Added basic smoother compile test</li>
<li>Added unit test for bool PropertyManager::set_range.</li>
<li>Added write unittest for binary stl files</li>
<li>Added c++11 test file</li>
<li>Use the acg macro to add the unittests to make sure flags are passed through (e.g. to enable c++11)</li>
</ul>

<b>Build System</b>
<ul>
<li>Python Bindings: strip pythonlibs version string of possible other characters than 0-9 and .  (e.g. '+')</li>
<li>Python Bindings: don't require boost-python</li>
<li>Python Bindings: updated the cmake file so that cmake finds boost python installations with the names python2 and python3</li>
<li>Python Bindings: fixed a cmake warning on os x (Policy CMP0042: MACOSX_RPATH)</li>
<li>fix windows warning about unknown preprocessor define</li>
<li>Default to release build type if not selected via cmake. Only on non Win platforms</li>
<li>No copy after build required for doc, as its copied by doxygen anyway</li>
<li>Got rid of the old ACGMakefiles, as they were not maintained anymore</li>
</ul>


</tr>

<tr valign=top><td><b>3.3</b> (2015/01/16,Rev.1204)</td><td>

<b>Core</b>
<ul>
<li>change name of the types "True" and "False" to "TrueType" and "FalseType" to clarify, that these are types and avoid conflicts</li>
<li>Fixed two missing this pointers</li>
<li>Removed several unused variables</li>
<li>PolyConnectivity: Fixed constness of EntityRange begin() and end() methods.</li>
<li>VectorT: add specializations for 5/6 dimension vectors</li>
<li>VectorT: added const getter for data_vector()</li>
<li>VectorT: <b> Modified Vector constructors!</b> The constructors now check the size of the vector at compile time not run time. This might produce compiler errors but ensures that the vectors are initialized correctly.</li>
</ul>

<b>Python Interface</b>
<ul>
<li>Added a Python interface for OpenMesh. Implemented via boost python</li>
</ul>

<b>Utils</b>
<ul>
<li>PropertyManager: Added copy_to method.</li>
<li>PropertyManager: Added static copy(...) convenience method.</li>
</ul>

<b>IO</b>
<ul>
<li>OBJ writer: remove excluding condition for face color (Thanks to Javier Granado for the hint). closes #2247 </li>
<li>PLY Reader: add custom property support for PLY reader ASCII version</li>
</ul>

<b>Tools</b>
<ul>
<li>VDPM: fix comparison with invalid iterator closes #2263 </li>
<li>Decimater: ModProgMeshT fix 32/64-bit bug on windows (analyzer and synthesizer reads with unsigned int -> 32bit, writer writes size_t -> possible 64-bit)</li>
<li>Decimater: Added an observer class which can trigger a callback to monitor and abort the decimater process from outside.</li>
</ul>

<b>Documentation</b>
<ul>
<li>New acg logo for OpenMesh</li>
<li>Fixed compilation documentation to include Qt5 and latest compilers</li>
<li>Added smootherdocu. closes #2185</li>
<li>Added documentation about direction of the circulators</li>
<li>Fixed Typo in Mesh Kernel Concept Documentation (return value)</li>
</ul>

<b>Unittests</b>
<ul>
<li>add unittest for vdpm (read and write/read) closes #2263</li>
</ul>

<b>Build system</b>
<ul>
<li>Apple/Unix: Don't install into libs/OpenMesh subdir but directly into libs. closes #2257</li>
<li>Apple/Unix: Install to lib64 on 64-bit. closes #2257</li>
<li>fix wrong name for static lib on unix based os with multi generator compilers</li>
<li>fix permissions for static lib (they have the same as all other libs now)</li>
<li>fix cmake (>=3.0) warning on MacOS idue to missing rpath. closes #2251</li>
<li>Fixed Typo in gtest finder (Thanks to Roman Zoller for the patch)</li>
</ul>

</tr>


<tr valign=top><td><b>3.2</b> (2014/07/18,Rev.1107)</td><td>

<b>Core</b>
<ul>
<li>Fixed copy paste typos in the vertex face and face face range code</li>
</ul>

<b>IO</b>
<ul>
<li>Silence the readers/writers (Some of them always wrote output to command line).</li>
</ul>

<b>Utils</b>
<ul>
<li>PropertyManager: Added PropertyManager::move to C++11 .</li>
</ul>


<b>Subdivider</b>
<ul>
<li>Added CatmullClark without point updates support.</li>
<li>Uniform, Longest Edge: fixed template deduction error with float precision meshes</li>
</ul>

<b>Documentation</b>
<ul>
<li>Updated doxyfile to 1.8.7</li>
<li>Added some documentation to get the to and from vertices to the mesh navigation page</li>
<li>Added boundary navigation info to mesh navigation page</li>
</ul>

<b>Build system</b>
<ul>
<li>Qt5 support for example apps</li>
<li>Improved OpenMesh cmake gtest finder for Xcode 5.1.1 with gtest 1.7</li>
<li>Don't copy qt4 anymore, if build_apps is disabled, but the qmake variable still defined</li>
<li>Add dependencies and fixbundle for apps only if we build apps</li>
</ul>

<b>Unittests</b>
<ul>
<li>Added unittest for textured meshes</li>
<li>Read/Write OBJ: Fixed unsigned signed comparison</li>
</ul>

</tr>

<tr valign=top><td><b>3.1</b> (2014/05/09,Rev.1050)</td><td>

<b>Core</b>
<ul>
<li>Fix for c++11 call to pointer to member function of type 'VertexIter ()' drops 'const' qualifier (Thanks to Ronald Richter and Kenshi Takayama for the fix)</li>
<li>PolyConnectivity: Added range based circulators courtesy of Kenshi Takayama. (Thanks!)</li>
<li>Rearranged the code a bit in order to have all range based stuff in one place.</li>
<li>Fixed calc_normals_... functions (Missing this pointer) Thanks to Martin Schmidt for the report</li>
</ul>

<b>Decimater</b>
<ul>
<li>Fixed Destructor of ModNormaldeviation: Requested normals on destruction</li>
<li>Decimater doesn't need normals anymore, if no module requires normals</li>
</ul>


<b>Utils</b>
<ul>
<li>PropertyManager: Added set_range method</li>
<li>PropertyManager: Added duplicate method</li>
</ul>

<b>Subdivider</b>
<ul>
<li>Added missing include of Property.hh to uniform loop subdivider. (Thanks to Jonathan Balzer for the hint)</li>
</ul>

<b>IO</b>
<ul>
<li>OBJ Writer: Fixed material writer using wrong stream (Thanks to  Vladimir Chalupecky for the fix). closes 2037</li> 
<li>VTK Writer: Added simple VTK writer writing only vertices and faces (Thanks to Vladimir Chalupecky for the code). closes 2039</li>
<li>PLY Reader: Fix locking up when loading some binary files ( Thanks to  Peter Newman for the patch). closes 2141</li>
</ul>


<b>Unittests</b>
<ul>
<li>Added unittests for the normal calculation functions </li>
</ul>

<b>Build system</b>
<ul>
<li>Added OpenMesh finder. Closes 959</li>
</ul>

</tr>

<tr valign=top><td><b>3.0</b> (2014/02/05,Rev.990)</td><td>

<b>Core</b>
<ul>
<li>Rewrote all circulators (STL compliant, removed redundant code)</li>
<li>Added stream operator for FVIter.</li>
<li>Added mesh cast for meshes with different but identical traits.</li>
<li>Fixed segfault of copy_all_properties if one property has been removed before. (Thanks to Simon Flöry for the patch)</li>
<li>Added more convenient versions of calc_edge_vector to PolyMeshT.</li>
<li>Added HalfedgeLoop iterator to iterate over loops of halfedges (faces, hoes)</li>
<li>OpenMesh: Added convenience method for face centroid computation.</li>
</ul>

<b>IO</b>
<ul>
<li>close stl files with endsolid</li>
<li>fix om writer writing colors</li>
<li>Fixed regression and Problem in OM writer</li>
<li>Fixed bug in OM Writer when bool property is written which contains 0x20. (Thanks to Simon Flöry for the patch)</li>
<li>The OpenMesh STLReader now also reads face normals if requested</li>
</ul>

<b>Utils</b>
<ul>
<li>PropertyManager: Added ability to get property name</li>
<li>PropertyManager: Added getMesh property to PropertyManager.</li>
<li>Improved C++11-branch of PropertyManager and at the same time fixed compile error with gcc 4.7</li>
<li>Put mesh_cast methods into surrounding namespace so clang finds them.</li>
<li>Build fix for getopt.h on Apple. (Thanks to Adam Vandenberg for the fix)</li>
</ul>

<b>Documentation</b>
<ul>
<li>Adapt to new iterators</li>
<li>Updated the OpenMesh tutorials to be OM 3 compliant</li>
<li>Use short names in Doxygen to prevent windows build failure due to excessive name length</li>
<li>Updated doxygen files</li>
<li>Use different DOT_FONTNAME</li>
<li>Added hint that collapse needs status attrributes on the mesh</li>
<li>Raised Documentation to Doxyfile 1.8.5</li>
</ul>

<b>Unittests</b>
<ul>
<li>Added more om reader/writer unittests</li>
<li>Mesh Dual test</li>
<li>Stripifier test</li>
<li>Split unittests into seperate compile units</li>
<li>Added mesh_cast unit test</li>
<li>STL normal reader unit tests</li>
</ul>

<b>Build system</b>
<ul>
<li>Build unittests with variadic max of 10 on VS 2012</li>
<li>enable deprecated warning for msvc</li>
<li>Added flag to activate largeaddressaware option on WIN</li>
<li>Removed obsolete ftemplate-depth, as the defaults should be fine</li>
<li>Removed outdated VS2008 project file</li>
<li>Use cmake generator targetnames for copying files</li>
</ul>

</tr>

<tr valign=top><td><b>2.4</b> (2013/08/07,Rev.882)</td><td>

<b>Significant interface changes</b>
<ul>
<li>The functions n_vertices(),n_edges().n_faces() return size_t now.</li>
<li>reserve and resize of the property vectors now take size_t</li>
<li>Fixed various other size_t conversions</li>
</ul>

<b>Vector Type</b>
<ul>
<li>vector_type min(const vector_type& _rhs) and vector_type max(const vector_type& _rhs) are declared const now. (Thanks to Vladimir Chalupecky for the hint)</li>
<li>minimize and maximize return vector_type& (reference) instead of vector_type (value) to allow chaining p.minimize(p1).minimize(p2). (Thanks to Vladimir Chalupecky for the hint)</li>
</ul>

<b>Core</b>
<ul>
<li>Allow PolyConnectivity::delete_edge to mark an edge as deleted, if there are no faces incident.</li>
<li>Don't use c headers in c++ files anymore</li>
</ul>


<b>IO</b>
<ul>
<li>Try to get rid of memory leak in IOManager(Changes the pointer used for IOManager to a static IOManager in the getter function)</li>
<li>Fixed writing face indices in different configurations regarding vertex texture coordinates and vertex normals (Thanks to Robert Luo for the patch)</li>
<li>Fixed a bug with OBJReader that prevented the material color to be loaded correctlyi(Thanks to Karthik Nathan for the patch)</li>
<li>Made STL Reader work, with the clear = false flag and Redundant lookup removed. ( Thanks to Peter Newman for the patch)</li>
<li>Missing include, preventing build on VS2012 (Thanks to Mageri Filali Maltouf for the patch)</li>
<li>Fixed various warnings reported by cppcheck</li>
<li>read_mesh now throws a compile error if an Options::Flag enum is passed as an argument instead of an Options object</li>
<li>Make OpenMesh PLY writer work as expected (Thanks to Chin-chia Wu for the patch)</li>
<li>Added colori and colorAi functions to BaseExporter which return Vec3i and Vec4i respectively</li>
<li>Adjusted the PLYWriter to use colori and colorAi for writing ascii files</li>
<li>Added a ColorFloat flag to Options, which can be set to write and read RGBA values as float instead of unsigned char</li>
<li>PLY writer and reader can now also handle color floats</li>
<li>OFF support for floats. Note that for reading binary OFF files with color floats, the user has to set the flag, that floats are expected</li>
</ul>


<b>Utils</b>
<ul>
<li>PropertyManager: Added PropertyManager::propertyExists() method.</li>
<li>PropertyManager: Enabled initialization of invalid PropertyManager.</li>
<li>Added color_cast from Vec3f and Vec4f to Vec3i and Vec3ui</li>
<li>Added color_cast from Vec4f to Vec4i and Vec4ui</li>

</ul>

<b>Decimater</b>
<ul>
<li>Make Hausdorff module thread safe. Removed static point vector. (Thanks to Falko Löffler for the fix)</li>
</ul>

<b>Tools</b>
<ul>
<li>Command Line Decimater: Added an explanation on how to use multiple modules to the commandlineDecimater help output</li>
<li>Command Line Decimater: The normal deviation module now also is a priority module in the commandlineDecimater tool</li>
<li>Gui Decimater: Added decimater related help output to DecimaterGui when 'h' is pressed as the application is running</li>
</ul>

<b>Unittests</b>
<ul>
<li>Added unittest for skipping iterators</li>
<li>Added unittest for collapse and is_collapse_ok</li>
<li>Added unittests for delete_face</li>
<li>Added unittests for circulators</li>
<li>Added test for writing and reading vertex colors to and from an OFF file. The default color type Vec3uc from DefaultTraits in Traits.hh is used.</li>
<li>Added a ply file written with MeshLab and a corresponding unittest</li>
<li>Added a unittest that writes and reads a binary PLY file with vertex colors</li>
</ul>

<b>Documentation</b>
<ul>
<li>Adjusted the documation for the decimation tutorial so that the priority module is correctly initialized</li>
</ul>

</tr>

<tr valign=top><td><b>2.3.1</b> (2012/12/20,Rev.778)</td><td>

<b>Core</b>
<ul>
<li>Return vertex handles of newly added vertices in split and split_copy for faces when passing points instead of handles</li>
<li>Fixed copy and paste typo in split_copy for face handle</li>
<li>Replaced fabs by the std methods to fix errors when using norms with double vectors</li>
</ul>

<b>IO</b>
<ul>
<li>Fixed missing cast in importer which lead to problems when using different vector type. (Thanks to Mario Deuss for the fix)</li>
<li>Fixed bug in OBJ reader, where some faces could be missing(Thanks to Ian Kerr for the Fix)</li>
</ul>

<b>Documentation</b>
<ul>
<li>Fixed Decimater example</li>
<li>Improved Docs for is_boundary() functions</li>
</ul>

<b>Unittests</b>
<ul>
<li>Added unittest for vertexOHalfedge Iterator</li>
<li>Added unittests for boundary vertices and faces</li>
<li>Added test for VectorT abs function</li>
</ul>


</tr>


<tr valign=top><td><b>2.3</b> (2012/11/12,Rev.758)</td><td>

<b>Core</b>
<ul>
<li>New garbage collection function with possibility to update existing handles</li>
<li>Fixed crash in garbage collection, if certain status flags are not available (warns in debug mode!)</li>
<li>Fixed some gcc-4.7 incompatibilities</li>
<li>TriMesh::split now returns the handle of the new vertex</li>
<li>Fixed delete_face function, not mariking halfedges as deleted, if the edge gets deleted.(Thanks to Maxime Quiblier for the bug report)</li>
<li>Added range based for loops compatible ranges to PolyConnectivity.</li>
<li>Added a function to copy single properties between entities of same type. (Thanks to Duncan Paterson for the patch)</li>
<li>Added functions to copy all properties between entities. (Thanks to Duncan Paterson for the patch)</li>
<li>Added split copy operations, which copy properties of splitted elements to the newly created ones. ( Thanks to Duncan Paterson for the patch )</li>
<li>Added flag to the property copy functions, if the standard properties should be copied along with the user defined ones</li>
<li>Added function to remove all primitives from the mesh, but leaving properties attached (mesh.clean() ) </li>
<li>Avoid double next_halfedge_handle call in collapse_ok</li>
<li>Fixed the usage of vector traits such that the traits are used and not the vector types value_type. (Thanks to Mario Deuss for the patch)</li>
<li>Fixed bug in halfedge normal computation, where a boundary halfedge was not correctly handled and caused a segfault.</li>
<li>Fixed missing this pointer in PolyMeshT.hh at calc_dihedral_angle </li>
</ul>

<b>Decimater</b>
<ul>
<li>Changed template parameters of the modules from Decimater type to Mesh type</li>
<li>Added multiple choice decimater (~4 times faster than the heap one, but no guarantee on accuracy)</li>
<li>Added mixed decimater, switching between mc decimater and standard decimater</li>
<li>Decimater modules don't need a decimater type as template argument anymore</li>
<li>Module parameters renamed</li>
<li>Added Decimater base class</li>
<li>Added the set_error_tolerance_factor function to ModBaseT and implemented it in inherited classes as necessary</li>
<li>Removed redundant tests in is_collapse_legal that where already performed in is_collapse_ok</li>
<li>ModHausdorff: Removed unused parameter</li>
<li>Added set_error_tolerance_factor to the modules, which can be used to scale the tolerance by a factor, allowing multiple decimation stages with increasing error tollerance</li>
</ul>


<b>Subdivider</b>
<ul>
<li>Fixed typedef problems causing compiler errors</li>
<li>Removed a wrong assertion in the refine method for vector handles</li>
</ul>

<b>IO</b>
<ul>
<li>Added precision option to openmesh writers</li>
<li>Fixed OBJ Reader not correctly setting per halfedge normals. (Thanks to Patrick Rauber for the report)</li>
<li>OM  Reader: Reader used different types on 32/64-bit systems. (Thanks to Martin Bayer for the patch)</li>
<li>OM  Reader: Also checks user options</li>
<li>STL Reader: Added the functionality to read meshes from istreams</li>
<li>STL Reader: Added the functionality to write meshes to ostreams</li>
<li>OBJ Reader: Follow of user requests (Warning! Old default behaviour was wrong, because the reader read everything, without checking for the user options!)</li>
<li>PLY Reader: Reader now checks the options set by the user and will skip components that are not requested
</ul>

<b>Utils</b>
<ul>
<li>Core/Utils: Added PropertyManager class.</li>
<li>Core/Utils: Added a Random Number generator with larger resolution (Windows supports only ~32k which is extended by this generator </li>
</ul>

<b>Apps</b>
<ul>
<li>QtViewer App tries to load textures for PLY (and other formats) too, if possible</li>
</ul>

<b>Unittests</b>
<ul>
<li>Added unittest for OBJ texture coordinates.</li>
<li>Added unittests for add_face.</li>
<li>Added unittest for getting handles and faces from the iterator.</li>
<li>Added unittest for creating a cube with 6 quads in a poly mesh.</li>
<li>Added unittest adding a cube with 12 faces triangulated to a trimesh.</li>
<li>Added unittest for MCDecimater</li>
<li>Added unittest for obj crash when colors are requested but not available</li>
<li>Added unittests (trimesh and polymesh) for split_copy</li>
<li>Added unittest for vector cross product</li>
<li>Added unittests for the adaptive composite subdivider</li>
<li>Added unittest for dihedral angle function</li>
<li>Added some more unittests for the PLY loader with different user options</li>
<li>Fixed gcc-4.7 warnings.</li>
</ul>

<b>Tools</b>
<ul>
<li>Added catmull clark subdivider. Thanks to Leon Kos for the code.</li>
</ul>


<b>Documentation</b>
<ul>
<li>More documentation for the add_face functions (and some code cleanup)</li>
<li>Updated doxyfile.config.in version</li>
<li>Updated documentation for garbage collection</li>
<li>Updated documentation for the vertex_split operation</li>
<li>Fixed typo on main page</li>
</ul>

<b>Build system</b>
<ul>
<li>Updated the Compiler flags construction to remove some unnecessary warnings with clang</li>
<li>Don't add the largeaddressaware flag when building with mingw</li>
<li>Readded missing DOXY_IGNORE_THIS definition to doxygen file</li>
<li>Output OpenMesh Build type in cmake header printout</li>
<li>Windows: Extended min max warning to allow undefs</li>
<li>Windows: Support DLL build of OpenMesh</li>
</ul>




</tr>

<tr valign=top><td><b>2.2</b> (2012/06/14,Rev.587)</td><td>

<b>Core</b>
<ul>
<li>Simplified iterators and made them integrate better with the STL. Specifically, value_type has changed from {Vertex,Edge,...} to {Vertex,Edge,...}Handle so that dereferenced iterators can actually be put to use, now.</li>
<li>Consolidated iterator code. Functionally equivalent but way cleaner than before.</li>
<li>Improved block in update_normals(), if there are no face normals (could cause a crash)</li>
<li>Fixed usage of operator | instead of dot</li>
<li>Added a check to is_collapse_ok in TriConnectivity if the edge is already deleted or not (Could cause crashes and non-manifold configs before).</li>
</ul>

<b>IO</b>
<ul>
<li>Made Binary IO readers multi-thread safe. (Thanks to Dominic Genest for the patch)</li>
<li>Fixed debug build crash on mac, reading from stringstream into emtpy string crashed when compiling with clang</li>
<li>Fixed stl reader by porting it to std string. It had serious problems in utf8 environments</li>
</ul>

<b>Geometry</b>
<ul>
<li>Added normalized function to VectorT which returns a normalized vector whithout modifying the current one.</li>
</ul>

<b>Utilities</b>
<ul>
<li>Fixed multiple connections of the omlog streams. (Thanks to Steffen Sauer for the patch)</li>
</ul>

<b>Unittests</b>
<ul>
<li>Added unittest for calling the normal computations.</li>
<li>Added unittests for ascii and binary stl files.</li>
</ul>


<b>Documentation</b>
<ul>
<li>Fixed doxygen warnings</li>
<li>Updated collapse function documentation</li>
<li>Updated triangulation function documentation</li>
<li>Updated normal computation documentations</li>
</ul>


<b>General</b>
<ul>
<li>Xcode 4.3 compatibility (Fixed issues that caused build errors with XCode 4.3)</li>
<li>Fixed some size_t uint conversion warnings</li>
</ul>

</tr>


<tr valign=top><td><b>2.1.1</b> (2012/03/01,Rev.544)</td><td>

<b>Tools</b>
<ul>
<li>Fixed wrong INCLUDE_TEMPLATE include definition headers for NormalCone, and some decimater modules.</li>
</ul>

<b>Unittests</b>
<ul>
<li>Only build the unit tests if google test has been found</li>
<li>Added flag to enable/disable building of unit tests</li>
</ul>

<b>Build system</b>
<ul>
<li>Drop Template only cc files (they produce no code and trigger some warnings)</li>
</ul>

</tr>

<tr valign=top><td><b>2.1</b> (2012/01/24,Rev.531)</td><td>

<b>Core</b>
<ul>
<li>Implemented is_collapse_ok for polymeshes</li>
<li>Implemented split_edge ( split(edgehandle,vertexhandle) ) for poly meshes</li>