doxy.config.in 99 KB
Newer Older
1
# Doxyfile 1.8.6
Jan Möbius's avatar
Jan Möbius committed
2 3

# This file describes the settings to be used by the documentation system
4
# doxygen (www.doxygen.org) for a project.
Jan Möbius's avatar
Jan Möbius committed
5
#
6 7 8 9
# All text after a double hash (##) is considered a comment and is placed in
# front of the TAG it is preceding.
#
# All text after a single hash (#) is considered a comment and will be ignored.
Jan Möbius's avatar
Jan Möbius committed
10
# The format is:
11 12 13 14
# TAG = value [value, ...]
# For lists, items can also be appended using:
# TAG += value [value, ...]
# Values that contain spaces should be placed between quotes (\" \").
Jan Möbius's avatar
Jan Möbius committed
15 16 17 18 19

#---------------------------------------------------------------------------
# Project related configuration options
#---------------------------------------------------------------------------

20
# This tag specifies the encoding used for all characters in the config file
21 22 23 24 25
# that follow. The default is UTF-8 which is also the encoding used for all text
# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
# for the list of possible encodings.
# The default value is: UTF-8.
Jan Möbius's avatar
Jan Möbius committed
26 27 28

DOXYFILE_ENCODING      = UTF-8

29 30 31 32 33
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
# double-quotes, unless you are using Doxywizard) that should identify the
# project for which the documentation is generated. This name is used in the
# title of most generated pages and in a few other places.
# The default value is: My Project.
Jan Möbius's avatar
Jan Möbius committed
34 35 36

PROJECT_NAME           = OpenMesh

37 38 39
# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
# could be handy for archiving the generated documentation or if some version
# control system is used.
Jan Möbius's avatar
Jan Möbius committed
40 41 42

PROJECT_NUMBER         =

43
# Using the PROJECT_BRIEF tag one can provide an optional one line description
44 45
# for a project that appears at the top of each page and should give viewer a
# quick idea about the purpose of the project. Keep the description short.
46 47 48

PROJECT_BRIEF          =

49 50 51 52
# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
# the documentation. The maximum height of the logo should not exceed 55 pixels
# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
# to the output directory.
53 54 55

PROJECT_LOGO           =

56 57 58 59
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
# into which the generated documentation will be written. If a relative path is
# entered, it will be relative to the location where doxygen was started. If
# left blank the current directory will be used.
Jan Möbius's avatar
Jan Möbius committed
60 61 62

OUTPUT_DIRECTORY       = @CMAKE_BINARY_DIR@/Build/@ACG_PROJECT_DATADIR@/Doc

63 64 65 66 67 68 69
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
# directories (in 2 levels) under the output directory of each output format and
# will distribute the generated files over these directories. Enabling this
# option can be useful when feeding doxygen a huge amount of source files, where
# putting all generated files in the same directory would otherwise causes
# performance problems for the file system.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
70 71 72

CREATE_SUBDIRS         = NO

73 74 75
# The OUTPUT_LANGUAGE tag is used to specify the language in which all
# documentation generated by doxygen is written. Doxygen will use this
# information to generate all constant output in the proper language.
76 77 78 79 80 81 82 83
# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
# Ukrainian and Vietnamese.
84
# The default value is: English.
Jan Möbius's avatar
Jan Möbius committed
85 86 87

OUTPUT_LANGUAGE        = English

88 89 90 91
# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
# descriptions after the members that are listed in the file and class
# documentation (similar to Javadoc). Set to NO to disable this.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
92 93 94

BRIEF_MEMBER_DESC      = YES

95 96 97 98
# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
# description of a member or function before the detailed description
#
# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
Jan Möbius's avatar
Jan Möbius committed
99
# brief descriptions will be completely suppressed.
100
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
101 102 103

REPEAT_BRIEF           = YES

104 105 106 107 108 109 110 111
# This tag implements a quasi-intelligent brief description abbreviator that is
# used to form the text in various listings. Each string in this list, if found
# as the leading text of the brief description, will be stripped from the text
# and the result, after processing the whole list, is used as the annotated
# text. Otherwise, the brief description is used as-is. If left blank, the
# following values are used ($name is automatically replaced with the name of
# the entity):The $name class, The $name widget, The $name file, is, provides,
# specifies, contains, represents, a, an and the.
Jan Möbius's avatar
Jan Möbius committed
112

113
ABBREVIATE_BRIEF       =
Jan Möbius's avatar
Jan Möbius committed
114

115
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
116
# doxygen will generate a detailed section even if there is only a brief
Jan Möbius's avatar
Jan Möbius committed
117
# description.
118
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
119 120 121

ALWAYS_DETAILED_SEC    = NO

122 123 124
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
# inherited members of a class in the documentation of that class as if those
# members were ordinary class members. Constructors, destructors and assignment
Jan Möbius's avatar
Jan Möbius committed
125
# operators of the base classes will not be shown.
126
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
127 128 129

INLINE_INHERITED_MEMB  = NO

130 131 132 133
# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
# before files name in the file list and in the header files. If set to NO the
# shortest path that makes the file name unique will be used
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
134 135 136

FULL_PATH_NAMES        = YES

137 138 139 140 141 142 143 144 145
# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
# Stripping is only done if one of the specified strings matches the left-hand
# part of the path. The tag can be used to show relative paths in the file list.
# If left blank the directory from which doxygen is run is used as the path to
# strip.
#
# Note that you can specify absolute paths here, but also relative paths, which
# will be relative from the directory where doxygen is started.
# This tag requires that the tag FULL_PATH_NAMES is set to YES.
Jan Möbius's avatar
Jan Möbius committed
146

147 148
STRIP_FROM_PATH        = @CMAKE_SOURCE_DIR@ \
                         @CMAKE_SOURCE_DIR@/src
Jan Möbius's avatar
Jan Möbius committed
149

150 151 152 153 154 155
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
# path mentioned in the documentation of a class, which tells the reader which
# header file to include in order to use a class. If left blank only the name of
# the header file containing the class definition is used. Otherwise one should
# specify the list of include paths that are normally passed to the compiler
# using the -I flag.
Jan Möbius's avatar
Jan Möbius committed
156

157 158
STRIP_FROM_INC_PATH    = @CMAKE_SOURCE_DIR@ \
                         @CMAKE_SOURCE_DIR@/src
Jan Möbius's avatar
Jan Möbius committed
159

160 161 162 163
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
# less readable) file names. This can be useful is your file systems doesn't
# support long names like on DOS, Mac, or CD-ROM.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
164

165
SHORT_NAMES            = YES
Jan Möbius's avatar
Jan Möbius committed
166

167 168 169 170 171 172
# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
# first line (until the first dot) of a Javadoc-style comment as the brief
# description. If set to NO, the Javadoc-style will behave just like regular Qt-
# style comments (thus requiring an explicit @brief command for a brief
# description.)
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
173 174 175

JAVADOC_AUTOBRIEF      = YES

176 177 178 179 180
# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
# line (until the first dot) of a Qt-style comment as the brief description. If
# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
# requiring an explicit \brief command for a brief description.)
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
181 182 183

QT_AUTOBRIEF           = NO

184 185 186 187 188 189 190 191 192
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
# a brief description. This used to be the default behavior. The new default is
# to treat a multi-line C++ comment block as a detailed description. Set this
# tag to YES if you prefer the old behavior instead.
#
# Note that setting this tag to YES also means that rational rose comments are
# not recognized any more.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
193 194 195

MULTILINE_CPP_IS_BRIEF = NO

196 197 198
# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
# documentation from any documented member that it re-implements.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
199 200 201

INHERIT_DOCS           = YES

202 203 204 205
# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
# new page for each member. If set to NO, the documentation of a member will be
# part of the file/class/namespace that contains it.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
206 207 208

SEPARATE_MEMBER_PAGES  = NO

209 210 211
# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
# uses this value to replace tabs by spaces in code fragments.
# Minimum value: 1, maximum value: 16, default value: 4.
Jan Möbius's avatar
Jan Möbius committed
212 213 214

TAB_SIZE               = 8

215 216 217 218 219 220 221 222 223
# This tag can be used to specify a number of aliases that act as commands in
# the documentation. An alias has the form:
# name=value
# For example adding
# "sideeffect=@par Side Effects:\n"
# will allow you to put the command \sideeffect (or @sideeffect) in the
# documentation, which will result in a user-defined paragraph with heading
# "Side Effects:". You can put \n's in the value part of an alias to insert
# newlines.
Jan Möbius's avatar
Jan Möbius committed
224

225 226 227
ALIASES                =

# This tag can be used to specify a number of word-keyword mappings (TCL only).
228 229
# A mapping has the form "name=value". For example adding "class=itcl::class"
# will allow you to use the command class in the itcl::class meaning.
230 231

TCL_SUBST              =
Jan Möbius's avatar
Jan Möbius committed
232

233 234 235 236 237
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
# only. Doxygen will then generate output that is more tailored for C. For
# instance, some of the names that are used will be different. The list of all
# members will be omitted, etc.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
238 239 240

OPTIMIZE_OUTPUT_FOR_C  = NO

241 242 243 244 245
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
# Python sources only. Doxygen will then generate output that is more tailored
# for that language. For instance, namespaces will be presented as packages,
# qualified scopes will look different, etc.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
246 247 248

OPTIMIZE_OUTPUT_JAVA   = NO

249
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
250 251
# sources. Doxygen will then generate output that is tailored for Fortran.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
252 253 254

OPTIMIZE_FOR_FORTRAN   = NO

255
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
256 257
# sources. Doxygen will then generate output that is tailored for VHDL.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
258 259 260

OPTIMIZE_OUTPUT_VHDL   = NO

261
# Doxygen selects the parser to use depending on the extension of the files it
Jan Möbius's avatar
Jan Möbius committed
262 263
# parses. With this tag you can assign which parser to use for a given
# extension. Doxygen has a built-in mapping, but you can override or extend it
264 265 266 267 268 269 270 271 272 273
# using this tag. The format is ext=language, where ext is a file extension, and
# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make
# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
# (default is Fortran), use: inc=Fortran f=C.
#
# Note For files without extension you can use no_extension as a placeholder.
#
# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
# the files are not read by doxygen.
274 275 276

EXTENSION_MAPPING      =

277 278
# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
# according to the Markdown format, which allows for more readable
279
# documentation. See http://daringfireball.net/projects/markdown/ for details.
280 281 282 283
# The output of markdown processing is further processed by doxygen, so you can
# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
# case of backward compatibilities issues.
# The default value is: YES.
284 285 286

MARKDOWN_SUPPORT       = YES

Jan Möbius's avatar
Jan Möbius committed
287 288 289 290
# When enabled doxygen tries to link words that correspond to documented
# classes, or namespaces to their corresponding documentation. Such a link can
# be prevented in individual cases by by putting a % sign in front of the word
# or globally by setting AUTOLINK_SUPPORT to NO.
291
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
292 293 294

AUTOLINK_SUPPORT       = YES

295
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
296 297 298 299
# to include (a tag file for) the STL sources as input, then you should set this
# tag to YES in order to let doxygen match functions declarations and
# definitions whose arguments contain STL classes (e.g. func(std::string);
# versus func(std::string) {}). This also make the inheritance and collaboration
Jan Möbius's avatar
Jan Möbius committed
300
# diagrams that involve STL classes more complete and accurate.
301
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
302

Jan Möbius's avatar
Jan Möbius committed
303
BUILTIN_STL_SUPPORT    = YES
Jan Möbius's avatar
Jan Möbius committed
304

305
# If you use Microsoft's C++/CLI language, you should set this option to YES to
Jan Möbius's avatar
Jan Möbius committed
306
# enable parsing support.
307
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
308 309 310

CPP_CLI_SUPPORT        = NO

311 312 313 314 315
# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
# will parse them like normal C++ but will assume all classes use public instead
# of private inheritance when no explicit protection keyword is present.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
316 317 318

SIP_SUPPORT            = NO

Jan Möbius's avatar
Jan Möbius committed
319
# For Microsoft's IDL there are propget and propput attributes to indicate
320 321 322 323 324 325
# getter and setter methods for a property. Setting this option to YES will make
# doxygen to replace the get and set methods by a property in the documentation.
# This will only work if the methods are indeed getting or setting a simple
# type. If this is not the case, or you want to show the methods anyway, you
# should set this option to NO.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
326 327 328

IDL_PROPERTY_SUPPORT   = YES

329 330 331
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
# tag is set to YES, then doxygen will reuse the documentation of the first
# member in the group (if any) for the other members of the group. By default
Jan Möbius's avatar
Jan Möbius committed
332
# all members of a group must be documented explicitly.
333
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
334 335 336

DISTRIBUTE_GROUP_DOC   = YES

337 338 339 340 341 342
# Set the SUBGROUPING tag to YES to allow class member groups of the same type
# (for instance a group of public functions) to be put as a subgroup of that
# type (e.g. under the Public Functions section). Set it to NO to prevent
# subgrouping. Alternatively, this can be done per class using the
# \nosubgrouping command.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
343 344 345

SUBGROUPING            = YES

346 347 348 349 350 351 352 353
# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
# are shown inside the group in which they are included (e.g. using \ingroup)
# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
# and RTF).
#
# Note that this feature does not work in combination with
# SEPARATE_MEMBER_PAGES.
# The default value is: NO.
354 355 356

INLINE_GROUPED_CLASSES = NO

357 358 359
# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
# with only public data fields or simple typedef fields will be shown inline in
# the documentation of the scope in which they are defined (i.e. file,
Jan Möbius's avatar
Jan Möbius committed
360
# namespace, or group documentation), provided this scope is documented. If set
361 362 363
# to NO, structs, classes, and unions are shown on a separate page (for HTML and
# Man pages) or section (for LaTeX and RTF).
# The default value is: NO.
364 365 366

INLINE_SIMPLE_STRUCTS  = NO

367 368
# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
# enum is documented as struct, union, or enum with the name of the typedef. So
369 370
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
# with name TypeT. When disabled the typedef will appear as a member of a file,
371 372
# namespace, or class. And the struct will be named TypeS. This can typically be
# useful for C code in case the coding convention dictates that all compound
Jan Möbius's avatar
Jan Möbius committed
373
# types are typedef'ed and only the typedef is referenced, never the tag name.
374
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
375 376 377

TYPEDEF_HIDES_STRUCT   = NO

Jan Möbius's avatar
Jan Möbius committed
378
# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
379 380 381 382 383 384 385 386 387
# cache is used to resolve symbols given their name and scope. Since this can be
# an expensive process and often the same symbol appears multiple times in the
# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
# doxygen will become slower. If the cache is too large, memory is wasted. The
# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
# symbols. At the end of a run doxygen will report the cache usage and suggest
# the optimal cache size from a speed point of view.
# Minimum value: 0, maximum value: 9, default value: 0.
388 389 390

LOOKUP_CACHE_SIZE      = 0

Jan Möbius's avatar
Jan Möbius committed
391 392 393 394
#---------------------------------------------------------------------------
# Build related configuration options
#---------------------------------------------------------------------------

395
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
396 397 398 399 400 401
# documentation are documented, even if no documentation was available. Private
# class members and static file members will be hidden unless the
# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
# Note: This will also disable the warnings about undocumented members that are
# normally produced when WARNINGS is set to YES.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
402 403 404

EXTRACT_ALL            = NO

405 406 407
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
# be included in the documentation.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
408 409 410

EXTRACT_PRIVATE        = NO

Jan Möbius's avatar
Jan Möbius committed
411 412
# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
# scope will be included in the documentation.
413
# The default value is: NO.
414 415 416

EXTRACT_PACKAGE        = NO

417 418 419
# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
# included in the documentation.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
420 421 422

EXTRACT_STATIC         = NO

423 424 425 426 427
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
# locally in source files will be included in the documentation. If set to NO
# only classes defined in header files are included. Does not have any effect
# for Java sources.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
428 429 430

EXTRACT_LOCAL_CLASSES  = YES

431 432 433 434 435
# This flag is only useful for Objective-C code. When set to YES local methods,
# which are defined in the implementation section but not in the interface are
# included in the documentation. If set to NO only methods in the interface are
# included.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
436 437 438

EXTRACT_LOCAL_METHODS  = NO

439 440
# If this flag is set to YES, the members of anonymous namespaces will be
# extracted and appear in the documentation as a namespace called
441 442 443 444
# 'anonymous_namespace{file}', where file will be replaced with the base name of
# the file that contains the anonymous namespace. By default anonymous namespace
# are hidden.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
445 446 447

EXTRACT_ANON_NSPACES   = NO

448 449 450 451 452
# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
# undocumented members inside documented classes or files. If set to NO these
# members will be included in the various overviews, but no documentation
# section is generated. This option has no effect if EXTRACT_ALL is enabled.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
453 454 455

HIDE_UNDOC_MEMBERS     = NO

456 457 458 459 460
# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
# undocumented classes that are normally visible in the class hierarchy. If set
# to NO these classes will be included in the various overviews. This option has
# no effect if EXTRACT_ALL is enabled.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
461 462 463

HIDE_UNDOC_CLASSES     = NO

464 465 466 467
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
# (class|struct|union) declarations. If set to NO these declarations will be
# included in the documentation.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
468 469 470

HIDE_FRIEND_COMPOUNDS  = NO

471 472 473 474
# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
# documentation blocks found inside the body of a function. If set to NO these
# blocks will be appended to the function's detailed documentation block.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
475 476 477

HIDE_IN_BODY_DOCS      = NO

478 479 480 481
# The INTERNAL_DOCS tag determines if documentation that is typed after a
# \internal command is included. If the tag is set to NO then the documentation
# will be excluded. Set it to YES to include the internal documentation.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
482 483 484

INTERNAL_DOCS          = YES

485 486
# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
# names in lower-case letters. If set to YES upper-case letters are also
487 488
# allowed. This is useful if you have classes or files whose names only differ
# in case and if your file system supports case sensitive file names. Windows
Jan Möbius's avatar
Jan Möbius committed
489
# and Mac users are advised to set this option to NO.
490
# The default value is: system dependent.
Jan Möbius's avatar
Jan Möbius committed
491 492 493

CASE_SENSE_NAMES       = YES

494 495 496 497
# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
# their full class and namespace scopes in the documentation. If set to YES the
# scope will be hidden.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
498 499 500

HIDE_SCOPE_NAMES       = NO

501 502 503
# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
# the files that are included by a file in the documentation of that file.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
504 505 506

SHOW_INCLUDE_FILES     = YES

507 508 509 510 511 512 513
# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
# grouped member an include statement to the documentation, telling the reader
# which file to include in order to use the member.
# The default value is: NO.

SHOW_GROUPED_MEMB_INC  = NO

514 515 516
# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
# files with double quotes in the documentation rather than with sharp brackets.
# The default value is: NO.
517 518 519

FORCE_LOCAL_INCLUDES   = NO

520 521 522
# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
# documentation for inline members.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
523 524 525

INLINE_INFO            = YES

526 527 528 529
# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
# (detailed) documentation of file and class members alphabetically by member
# name. If set to NO the members will appear in declaration order.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
530 531 532

SORT_MEMBER_DOCS       = YES

533 534
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
# descriptions of file, namespace and class members alphabetically by member
535 536
# name. If set to NO the members will appear in declaration order. Note that
# this will also influence the order of the classes in the class list.
537
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
538 539 540

SORT_BRIEF_DOCS        = NO

541 542 543 544 545 546 547 548 549
# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
# (brief and detailed) documentation of class members so that constructors and
# destructors are listed first. If set to NO the constructors will appear in the
# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
# member documentation.
# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
# detailed member documentation.
# The default value is: NO.
550 551 552

SORT_MEMBERS_CTORS_1ST = NO

553 554 555 556
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
# of group names into alphabetical order. If set to NO the group names will
# appear in their defined order.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
557 558 559

SORT_GROUP_NAMES       = NO

560 561 562
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
# fully-qualified names, including namespaces. If set to NO, the class list will
# be sorted only by class name, not including the namespace part.
563
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
564 565 566
# Note: This option applies only to the class list, not to the alphabetical
# list.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
567 568 569

SORT_BY_SCOPE_NAME     = NO

570 571 572 573 574 575 576
# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
# type resolution of all parameters of a function it will reject a match between
# the prototype and the implementation of a member function even if there is
# only one candidate or it is obvious which candidate to choose by doing a
# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
# accept a match between prototype and implementation in such cases.
# The default value is: NO.
577 578 579

STRICT_PROTO_MATCHING  = NO

580 581 582 583
# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
# todo list. This list is created by putting \todo commands in the
# documentation.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
584 585 586

GENERATE_TODOLIST      = YES

587 588 589 590
# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
# test list. This list is created by putting \test commands in the
# documentation.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
591 592 593

GENERATE_TESTLIST      = YES

594 595 596
# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
# list. This list is created by putting \bug commands in the documentation.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
597 598 599

GENERATE_BUGLIST       = YES

600 601 602 603
# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
# the deprecated list. This list is created by putting \deprecated commands in
# the documentation.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
604 605 606

GENERATE_DEPRECATEDLIST= YES

607 608 609
# The ENABLED_SECTIONS tag can be used to enable conditional documentation
# sections, marked by \if <section_label> ... \endif and \cond <section_label>
# ... \endcond blocks.
Jan Möbius's avatar
Jan Möbius committed
610

611
ENABLED_SECTIONS       = OPENMESH_INTERNAL_DOC
Jan Möbius's avatar
Jan Möbius committed
612

613 614 615 616 617 618 619 620
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
# initial value of a variable or macro / define can have for it to appear in the
# documentation. If the initializer consists of more lines than specified here
# it will be hidden. Use a value of 0 to hide initializers completely. The
# appearance of the value of individual variables and macros / defines can be
# controlled using \showinitializer or \hideinitializer command in the
# documentation regardless of this setting.
# Minimum value: 0, maximum value: 10000, default value: 30.
Jan Möbius's avatar
Jan Möbius committed
621 622 623

MAX_INITIALIZER_LINES  = 30

624 625 626 627
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
# the bottom of the documentation of classes and structs. If set to YES the list
# will mention the files that were used to generate the documentation.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
628 629 630

SHOW_USED_FILES        = YES

631 632 633 634
# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
# will remove the Files entry from the Quick Index and from the Folder Tree View
# (if specified).
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
635 636 637

SHOW_FILES             = YES

638 639 640 641
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
# page. This will remove the Namespaces entry from the Quick Index and from the
# Folder Tree View (if specified).
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
642 643 644

SHOW_NAMESPACES        = YES

645 646 647
# The FILE_VERSION_FILTER tag can be used to specify a program or script that
# doxygen should invoke to get the current version for each file (typically from
# the version control system). Doxygen will invoke the program by executing (via
648 649 650 651
# popen()) the command command input-file, where command is the value of the
# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
# by doxygen. Whatever the program writes to standard output is used as the file
# version. For an example see the documentation.
Jan Möbius's avatar
Jan Möbius committed
652

653
FILE_VERSION_FILTER    =
Jan Möbius's avatar
Jan Möbius committed
654

655 656
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
# by doxygen. The layout file controls the global structure of the generated
Jan Möbius's avatar
Jan Möbius committed
657
# output files in an output format independent way. To create the layout file
658 659 660 661 662 663 664
# that represents doxygen's defaults, run doxygen with the -l option. You can
# optionally specify a file name after the option, if omitted DoxygenLayout.xml
# will be used as the name of the layout file.
#
# Note that if you run doxygen from a directory containing a file called
# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
# tag is left empty.
Jan Möbius's avatar
Jan Möbius committed
665

666 667
LAYOUT_FILE            =

668 669 670 671 672 673 674 675
# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
# the reference definitions. This must be a list of .bib files. The .bib
# extension is automatically appended if omitted. This requires the bibtex tool
# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
# For LaTeX the style of the bibliography can be controlled using
# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
# search path. Do not use file names with spaces, bibtex cannot handle them. See
# also \cite for info how to create references.
676 677

CITE_BIB_FILES         =
Jan Möbius's avatar
Jan Möbius committed
678 679

#---------------------------------------------------------------------------
680
# Configuration options related to warning and progress messages
Jan Möbius's avatar
Jan Möbius committed
681 682
#---------------------------------------------------------------------------

683 684 685 686
# The QUIET tag can be used to turn on/off the messages that are generated to
# standard output by doxygen. If QUIET is set to YES this implies that the
# messages are off.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
687 688 689

QUIET                  = YES

690
# The WARNINGS tag can be used to turn on/off the warning messages that are
691 692 693 694 695
# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
# this implies that the warnings are on.
#
# Tip: Turn warnings on while writing the documentation.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
696 697 698

WARNINGS               = YES

699 700 701 702
# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
# will automatically be disabled.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
703

Jan Möbius's avatar
Jan Möbius committed
704
WARN_IF_UNDOCUMENTED   = NO
Jan Möbius's avatar
Jan Möbius committed
705

706 707 708 709 710
# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
# potential errors in the documentation, such as not documenting some parameters
# in a documented function, or documenting parameters that don't exist or using
# markup commands wrongly.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
711 712 713

WARN_IF_DOC_ERROR      = YES

714 715 716 717 718
# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
# are documented, but have no documentation for their parameters or return
# value. If set to NO doxygen will only warn about wrong or incomplete parameter
# documentation, but not about the absence of documentation.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
719 720 721

WARN_NO_PARAMDOC       = NO

722 723 724 725 726 727 728
# The WARN_FORMAT tag determines the format of the warning messages that doxygen
# can produce. The string should contain the $file, $line, and $text tags, which
# will be replaced by the file and line number from which the warning originated
# and the warning text. Optionally the format may contain $version, which will
# be replaced by the version of the file (if it could be obtained via
# FILE_VERSION_FILTER)
# The default value is: $file:$line: $text.
Jan Möbius's avatar
Jan Möbius committed
729 730 731

WARN_FORMAT            = "$file:$line: $text"

732 733 734
# The WARN_LOGFILE tag can be used to specify a file to which warning and error
# messages should be written. If left blank the output is written to standard
# error (stderr).
Jan Möbius's avatar
Jan Möbius committed
735

736
WARN_LOGFILE           =
Jan Möbius's avatar
Jan Möbius committed
737 738

#---------------------------------------------------------------------------
739
# Configuration options related to the input files
Jan Möbius's avatar
Jan Möbius committed
740 741
#---------------------------------------------------------------------------

742 743 744 745 746
# The INPUT tag is used to specify the files and/or directories that contain
# documented source files. You may enter file names like myfile.cpp or
# directories like /usr/src/myproject. Separate the files or directories with
# spaces.
# Note: If this tag is empty the current directory is searched.
Jan Möbius's avatar
Jan Möbius committed
747 748 749

INPUT                  = @CMAKE_CURRENT_SOURCE_DIR@/..

750
# This tag can be used to specify the character encoding of the source files
751 752 753 754 755
# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
# documentation (see: http://www.gnu.org/software/libiconv) for the list of
# possible encodings.
# The default value is: UTF-8.
Jan Möbius's avatar
Jan Möbius committed
756 757 758

INPUT_ENCODING         = UTF-8

759
# If the value of the INPUT tag contains directories, you can use the
760 761 762 763 764 765 766
# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
# *.h) to filter out the source-files in the directories. If left blank the
# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
# *.qsf, *.as and *.js.
Jan Möbius's avatar
Jan Möbius committed
767 768 769 770 771

FILE_PATTERNS          = *.cc \
                         *.hh \
                         *.docu

772 773 774
# The RECURSIVE tag can be used to specify whether or not subdirectories should
# be searched for input files as well.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
775 776 777

RECURSIVE              = YES

778 779
# The EXCLUDE tag can be used to specify files and/or directories that should be
# excluded from the INPUT source files. This way you can easily exclude a
Jan Möbius's avatar
Jan Möbius committed
780
# subdirectory from a directory tree whose root is specified with the INPUT tag.
781
#
782 783
# Note that relative paths are relative to the directory from which doxygen is
# run.
Jan Möbius's avatar
Jan Möbius committed
784 785

EXCLUDE                = @CMAKE_CURRENT_SOURCE_DIR@/Examples \
786
                         @CMAKE_CURRENT_SOURCE_DIR@/../src/OpenMesh/Tools/Test \
Jan Möbius's avatar
Jan Möbius committed
787
                         @CMAKE_CURRENT_SOURCE_DIR@/../src/OpenMesh/Apps/Unsupported \
788
                         @CMAKE_CURRENT_BINARY_DIR@
Jan Möbius's avatar
Jan Möbius committed
789

790 791
# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
# directories that are symbolic links (a Unix file system feature) are excluded
Jan Möbius's avatar
Jan Möbius committed
792
# from the input.
793
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
794 795 796

EXCLUDE_SYMLINKS       = NO

797 798
# If the value of the INPUT tag contains directories, you can use the
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
799 800 801 802
# certain files from those directories.
#
# Note that the wildcards are matched against the file with absolute path, so to
# exclude all test directories for example use the pattern */test/*
Jan Möbius's avatar
Jan Möbius committed
803 804 805 806 807 808 809

EXCLUDE_PATTERNS       = .svn \
                         CVS \
                         Debian64 \
                         *.moc.cc \
                         footer.hh

810 811 812 813
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
# (namespaces, classes, functions, etc.) that should be excluded from the
# output. The symbol name can be a fully qualified name, a word, or if the
# wildcard * is used, a substring. Examples: ANamespace, AClass,
Jan Möbius's avatar
Jan Möbius committed
814
# AClass::ANamespace, ANamespace::*Test
815 816 817
#
# Note that the wildcards are matched against the file with absolute path, so to
# exclude all test directories use the pattern */test/*
Jan Möbius's avatar
Jan Möbius committed
818

819
EXCLUDE_SYMBOLS        =
Jan Möbius's avatar
Jan Möbius committed
820

821 822 823
# The EXAMPLE_PATH tag can be used to specify one or more files or directories
# that contain example code fragments that are included (see the \include
# command).
Jan Möbius's avatar
Jan Möbius committed
824 825 826 827

EXAMPLE_PATH           = @CMAKE_CURRENT_SOURCE_DIR@/Examples \
                         @CMAKE_CURRENT_SOURCE_DIR@/Tutorial

828
# If the value of the EXAMPLE_PATH tag contains directories, you can use the
829 830 831
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
# *.h) to filter out the source-files in the directories. If left blank all
# files are included.
Jan Möbius's avatar
Jan Möbius committed
832 833

EXAMPLE_PATTERNS       = *.cc \
Jan Möbius's avatar
Jan Möbius committed
834 835
                         *.hh \
                         *.txt
Jan Möbius's avatar
Jan Möbius committed
836

837
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
838 839 840
# searched for input files to be used with the \include or \dontinclude commands
# irrespective of the value of the RECURSIVE tag.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
841 842 843

EXAMPLE_RECURSIVE      = NO

844 845 846
# The IMAGE_PATH tag can be used to specify one or more files or directories
# that contain images that are to be included in the documentation (see the
# \image command).
Jan Möbius's avatar
Jan Möbius committed
847 848 849

IMAGE_PATH             = @CMAKE_CURRENT_SOURCE_DIR@/images

850 851
# The INPUT_FILTER tag can be used to specify a program that doxygen should
# invoke to filter for each input file. Doxygen will invoke the filter program
852 853 854 855 856 857 858 859 860
# by executing (via popen()) the command:
#
# <filter> <input-file>
#
# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
# name of an input file. Doxygen will then use the output that the filter
# program writes to standard output. If FILTER_PATTERNS is specified, this tag
# will be ignored.
#
Jan Möbius's avatar
Jan Möbius committed
861 862 863
# Note that the filter must not add or remove lines; it is applied before the
# code is scanned, but not when the output code is generated. If lines are added
# or removed, the anchors will not be placed correctly.
Jan Möbius's avatar
Jan Möbius committed
864

865
INPUT_FILTER           =
Jan Möbius's avatar
Jan Möbius committed
866

867
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
868 869 870 871 872
# basis. Doxygen will compare the file name with each pattern and apply the
# filter if there is a match. The filters are a list of the form: pattern=filter
# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
# patterns match the file name, INPUT_FILTER is applied.
Jan Möbius's avatar
Jan Möbius committed
873

874
FILTER_PATTERNS        =
Jan Möbius's avatar
Jan Möbius committed
875

876
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
877 878 879
# INPUT_FILTER ) will also be used to filter the input files that are used for
# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
880 881 882

FILTER_SOURCE_FILES    = NO

883
# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
884 885 886 887
# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
# it is also possible to disable source filtering for a specific pattern using
# *.ext= (so without naming a filter).
# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
888 889 890

FILTER_SOURCE_PATTERNS =

891
# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
Jan Möbius's avatar
Jan Möbius committed
892 893
# is part of the input, its contents will be placed on the main page
# (index.html). This can be useful if you have a project on for instance GitHub
894
# and want to reuse the introduction page also for the doxygen output.
Jan Möbius's avatar
Jan Möbius committed
895 896 897

USE_MDFILE_AS_MAINPAGE =

Jan Möbius's avatar
Jan Möbius committed
898
#---------------------------------------------------------------------------
899
# Configuration options related to source browsing
Jan Möbius's avatar
Jan Möbius committed
900 901
#---------------------------------------------------------------------------

902 903 904 905 906 907
# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
# generated. Documented entities will be cross-referenced with these sources.
#
# Note: To get rid of all source code in the generated output, make sure that
# also VERBATIM_HEADERS is set to NO.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
908 909 910

SOURCE_BROWSER         = NO

911 912 913
# Setting the INLINE_SOURCES tag to YES will include the body of functions,
# classes and enums directly into the documentation.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
914 915 916

INLINE_SOURCES         = NO

917 918 919 920
# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
# special comment blocks from generated source code fragments. Normal C, C++ and
# Fortran comments will always remain visible.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
921 922 923

STRIP_CODE_COMMENTS    = YES

924 925 926
# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
# function all documented functions referencing it will be listed.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
927 928 929

REFERENCED_BY_RELATION = NO

930 931 932
# If the REFERENCES_RELATION tag is set to YES then for each documented function
# all documented entities called/used by that function will be listed.
# The default value is: NO.
Jan Möbius's avatar
Jan Möbius committed
933 934 935

REFERENCES_RELATION    = NO

936 937 938 939 940
# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
# link to the documentation.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
941 942 943

REFERENCES_LINK_SOURCE = YES

944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972
# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
# source code will show a tooltip with additional information such as prototype,
# brief description and links to the definition and documentation. Since this
# will make the HTML file larger and loading of large files a bit slower, you
# can opt to disable this feature.
# The default value is: YES.
# This tag requires that the tag SOURCE_BROWSER is set to YES.

SOURCE_TOOLTIPS        = YES

# If the USE_HTAGS tag is set to YES then the references to source code will
# point to the HTML generated by the htags(1) tool instead of doxygen built-in
# source browser. The htags tool is part of GNU's global source tagging system
# (see http://www.gnu.org/software/global/global.html). You will need version
# 4.8.6 or higher.
#
# To use it do the following:
# - Install the latest version of global
# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
# - Make sure the INPUT points to the root of the source tree
# - Run doxygen as normal
#
# Doxygen will invoke htags (and that will in turn invoke gtags), so these
# tools must be available from the command line (i.e. in the search path).
#
# The result: instead of the source browser generated by doxygen, the links to
# source code will now point to the output of htags.
# The default value is: NO.
# This tag requires that the tag SOURCE_BROWSER is set to YES.
Jan Möbius's avatar
Jan Möbius committed
973 974 975

USE_HTAGS              = NO

976 977 978 979 980
# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
# verbatim copy of the header file for each class for which an include is
# specified. Set to NO to disable this.
# See also: Section \class.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
981 982 983 984

VERBATIM_HEADERS       = YES

#---------------------------------------------------------------------------
985
# Configuration options related to the alphabetical class index
Jan Möbius's avatar
Jan Möbius committed
986 987
#---------------------------------------------------------------------------

988 989 990 991
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
# compounds will be generated. Enable this if the project contains a lot of
# classes, structs, unions or interfaces.
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
992 993 994

ALPHABETICAL_INDEX     = NO

995 996 997 998
# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
# which the alphabetical index list will be split.
# Minimum value: 1, maximum value: 20, default value: 5.
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
Jan Möbius's avatar
Jan Möbius committed
999 1000 1001

COLS_IN_ALPHA_INDEX    = 5

1002 1003 1004 1005 1006
# In case all classes in a project start with a common prefix, all classes will
# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
# can be used to specify a prefix (or a list of prefixes) that should be ignored
# while generating the index headers.
# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1007

1008
IGNORE_PREFIX          =
Jan Möbius's avatar
Jan Möbius committed
1009 1010

#---------------------------------------------------------------------------
1011
# Configuration options related to the HTML output
Jan Möbius's avatar
Jan Möbius committed
1012 1013
#---------------------------------------------------------------------------

1014 1015
# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
# The default value is: YES.
Jan Möbius's avatar
Jan Möbius committed
1016 1017 1018

GENERATE_HTML          = YES

1019 1020 1021 1022 1023
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
# it.
# The default directory is: html.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1024 1025 1026

HTML_OUTPUT            = html

1027 1028 1029 1030
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
# generated HTML page (for example: .htm, .php, .asp).
# The default value is: .html.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1031 1032 1033

HTML_FILE_EXTENSION    = .html

1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050
# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
# each generated HTML page. If the tag is left blank doxygen will generate a
# standard header.
#
# To get valid HTML the header file that includes any scripts and style sheets
# that doxygen needs, which is dependent on the configuration options used (e.g.
# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
# default header using
# doxygen -w html new_header.html new_footer.html new_stylesheet.css
# YourConfigFile
# and then modify the file new_header.html. See also section "Doxygen usage"
# for information on how to generate the default header that doxygen normally
# uses.
# Note: The header is subject to change so you typically have to regenerate the
# default header when upgrading to a newer version of doxygen. For a description
# of the possible markers and block names see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
1051 1052 1053

HTML_HEADER            =

1054 1055 1056 1057 1058 1059 1060
# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
# generated HTML page. If the tag is left blank doxygen will generate a standard
# footer. See HTML_HEADER for more information on how to generate a default
# footer and what special commands can be used inside the footer. See also
# section "Doxygen usage" for information on how to generate the default footer
# that doxygen normally uses.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1061 1062 1063

HTML_FOOTER            = @CMAKE_CURRENT_SOURCE_DIR@/html/acg_footer.html

1064 1065 1066 1067 1068 1069 1070 1071 1072
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
# sheet that is used by each HTML page. It can be used to fine-tune the look of
# the HTML output. If left blank doxygen will generate a default style sheet.
# See also section "Doxygen usage" for information on how to generate the style
# sheet that doxygen normally uses.
# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
# it is more robust and this tag (HTML_STYLESHEET) will in the future become
# obsolete.
# This tag requires that the tag GENERATE_HTML is set to YES.
1073 1074 1075

HTML_STYLESHEET        =

1076 1077 1078 1079 1080 1081 1082 1083
# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user-
# defined cascading style sheet that is included after the standard style sheets
# created by doxygen. Using this option one can overrule certain style aspects.
# This is preferred over using HTML_STYLESHEET since it does not replace the
# standard style sheet and is therefor more robust against future updates.
# Doxygen will copy the style sheet file to the output directory. For an example
# see the documentation.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1084 1085 1086

HTML_EXTRA_STYLESHEET  =

1087 1088 1089
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
# other source files which should be copied to the HTML output directory. Note
# that these files will be copied to the base HTML output directory. Use the
Jan Möbius's avatar
Jan Möbius committed
1090
# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
1091 1092 1093
# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
# files will be copied as-is; there are no commands or markers available.
# This tag requires that the tag GENERATE_HTML is set to YES.
1094 1095 1096

HTML_EXTRA_FILES       =

1097 1098 1099 1100 1101 1102 1103 1104
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
# will adjust the colors in the stylesheet and background images according to
# this color. Hue is specified as an angle on a colorwheel, see
# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
# purple, and 360 is red again.
# Minimum value: 0, maximum value: 359, default value: 220.
# This tag requires that the tag GENERATE_HTML is set to YES.
1105 1106

HTML_COLORSTYLE_HUE    = 220
Jan Möbius's avatar
Jan Möbius committed
1107

1108 1109 1110 1111 1112
# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
# in the HTML output. For a value of 0 the output will use grayscales only. A
# value of 255 will produce the most vivid colors.
# Minimum value: 0, maximum value: 255, default value: 100.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1113

1114
HTML_COLORSTYLE_SAT    = 100
Jan Möbius's avatar
Jan Möbius committed
1115

1116 1117 1118 1119 1120 1121 1122 1123
# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
# luminance component of the colors in the HTML output. Values below 100
# gradually make the output lighter, whereas values above 100 make the output
# darker. The value divided by 100 is the actual gamma applied, so 80 represents
# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
# change the gamma.
# Minimum value: 40, maximum value: 240, default value: 80.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1124

1125 1126 1127
HTML_COLORSTYLE_GAMMA  = 80

# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
1128 1129 1130 1131
# page will contain the date and time when the page was generated. Setting this
# to NO can help when comparing the output of multiple runs.
# The default value is: YES.
# This tag requires that the tag GENERATE_HTML is set to YES.
1132 1133 1134 1135 1136 1137

HTML_TIMESTAMP         = YES

# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
# documentation will contain sections that can be hidden and shown after the
# page has loaded.
1138 1139
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1140 1141 1142

HTML_DYNAMIC_SECTIONS  = NO

1143 1144 1145 1146 1147 1148 1149 1150 1151 1152
# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
# shown in the various tree structured indices initially; the user can expand
# and collapse entries dynamically later on. Doxygen will expand the tree to
# such a level that at most the specified number of entries are visible (unless
# a fully collapsed tree already exceeds this amount). So setting the number of
# entries 1 will produce a full collapsed tree by default. 0 is a special value
# representing an infinite number of entries and will result in a full expanded
# tree by default.
# Minimum value: 0, maximum value: 9999, default value: 100.
# This tag requires that the tag GENERATE_HTML is set to YES.
1153 1154 1155

HTML_INDEX_NUM_ENTRIES = 100

1156 1157 1158 1159 1160 1161 1162 1163
# If the GENERATE_DOCSET tag is set to YES, additional index files will be
# generated that can be used as input for Apple's Xcode 3 integrated development
# environment (see: http://developer.apple.com/tools/xcode/), introduced with
# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
# Makefile in the HTML output directory. Running make will produce the docset in
# that directory and running make install will install the docset in
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
1164
# for more information.
1165 1166
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1167 1168 1169

GENERATE_DOCSET        = NO

1170 1171 1172 1173 1174
# This tag determines the name of the docset feed. A documentation feed provides
# an umbrella under which multiple documentation sets from a single provider
# (such as a company or product suite) can be grouped.
# The default value is: Doxygen generated docs.
# This tag requires that the tag GENERATE_DOCSET is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1175 1176 1177

DOCSET_FEEDNAME        = "Doxygen generated docs"

1178 1179 1180 1181 1182
# This tag specifies a string that should uniquely identify the documentation
# set bundle. This should be a reverse domain-name style string, e.g.
# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
# The default value is: org.doxygen.Project.
# This tag requires that the tag GENERATE_DOCSET is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1183 1184 1185

DOCSET_BUNDLE_ID       = org.doxygen.Project

1186 1187 1188 1189 1190
# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
# the documentation publisher. This should be a reverse domain-name style
# string, e.g. com.mycompany.MyDocSet.documentation.
# The default value is: org.doxygen.Publisher.
# This tag requires that the tag GENERATE_DOCSET is set to YES.
1191 1192 1193

DOCSET_PUBLISHER_ID    = org.doxygen.Publisher

1194 1195 1196
# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
# The default value is: Publisher.
# This tag requires that the tag GENERATE_DOCSET is set to YES.
1197 1198 1199

DOCSET_PUBLISHER_NAME  = Publisher

1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214
# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
# Windows.
#
# The HTML Help Workshop contains a compiler that can convert all HTML output
# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
# files are now used as the Windows 98 help format, and will replace the old
# Windows help format (.hlp) on all Windows platforms in the future. Compressed
# HTML files also contain an index, a table of contents, and you can search for
# words in the documentation. The HTML workshop also contains a viewer for
# compressed HTML files.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1215 1216 1217

GENERATE_HTMLHELP      = NO

1218 1219
# The CHM_FILE tag can be used to specify the file name of the resulting .chm
# file. You can add a path in front of the file if the result should not be
Jan Möbius's avatar
Jan Möbius committed
1220
# written to the html output directory.
1221
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1222

1223
CHM_FILE               =
Jan Möbius's avatar
Jan Möbius committed
1224

1225 1226 1227 1228 1229
# The HHC_LOCATION tag can be used to specify the location (absolute path
# including file name) of the HTML help compiler ( hhc.exe). If non-empty
# doxygen will try to run the HTML help compiler on the generated index.hhp.
# The file has to be specified with full path.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1230

1231
HHC_LOCATION           =
Jan Möbius's avatar
Jan Möbius committed
1232

1233 1234 1235 1236
# The GENERATE_CHI flag controls if a separate .chi index file is generated (
# YES) or that it should be included in the master .chm file ( NO).
# The default value is: NO.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1237 1238 1239

GENERATE_CHI           = NO

1240 1241 1242
# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
# and project file content.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1243

1244
CHM_INDEX_ENCODING     =
Jan Möbius's avatar
Jan Möbius committed
1245

1246 1247 1248 1249
# The BINARY_TOC flag controls whether a binary table of contents is generated (
# YES) or a normal table of contents ( NO) in the .chm file.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1250 1251 1252

BINARY_TOC             = NO

1253 1254 1255 1256
# The TOC_EXPAND flag can be set to YES to add extra items for group members to
# the table of contents of the HTML help documentation and to the tree view.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1257 1258 1259

TOC_EXPAND             = NO

1260
# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1261 1262 1263 1264 1265
# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
# (.qch) of the generated HTML documentation.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1266 1267 1268

GENERATE_QHP           = NO

1269 1270 1271 1272
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
# the file name of the resulting .qch file. The path specified is relative to
# the HTML output folder.
# This tag requires that the tag GENERATE_QHP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1273

1274
QCH_FILE               =
Jan Möbius's avatar
Jan Möbius committed
1275

1276 1277 1278 1279 1280
# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
# Project output. For more information please see Qt Help Project / Namespace
# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
# The default value is: org.doxygen.Project.
# This tag requires that the tag GENERATE_QHP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1281

1282
QHP_NAMESPACE          =
Jan Möbius's avatar
Jan Möbius committed
1283

1284 1285 1286 1287 1288 1289
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
# Help Project output. For more information please see Qt Help Project / Virtual
# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
# folders).
# The default value is: doc.
# This tag requires that the tag GENERATE_QHP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1290 1291 1292

QHP_VIRTUAL_FOLDER     = doc

1293 1294 1295 1296 1297
# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
# filter to add. For more information please see Qt Help Project / Custom
# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
# filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1298

1299
QHP_CUST_FILTER_NAME   =
Jan Möbius's avatar
Jan Möbius committed
1300

1301 1302 1303 1304 1305
# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
# custom filter to add. For more information please see Qt Help Project / Custom
# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
# filters).
# This tag requires that the tag GENERATE_QHP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1306

1307
QHP_CUST_FILTER_ATTRS  =
Jan Möbius's avatar
Jan Möbius committed
1308

1309
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1310 1311 1312
# project's filter section matches. Qt Help Project / Filter Attributes (see:
# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
# This tag requires that the tag GENERATE_QHP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1313

1314
QHP_SECT_FILTER_ATTRS  =
Jan Möbius's avatar
Jan Möbius committed
1315

1316 1317 1318 1319
# The QHG_LOCATION tag can be used to specify the location of Qt's
# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
# generated .qhp file.
# This tag requires that the tag GENERATE_QHP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1320

1321
QHG_LOCATION           =
Jan Möbius's avatar
Jan Möbius committed
1322

1323 1324 1325 1326 1327 1328 1329 1330 1331
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
# generated, together with the HTML files, they form an Eclipse help plugin. To
# install this plugin and make it available under the help contents menu in
# Eclipse, the contents of the directory containing the HTML and XML files needs
# to be copied into the plugins directory of eclipse. The name of the directory
# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
# After copying Eclipse needs to be restarted before the help appears.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1332

1333
GENERATE_ECLIPSEHELP   = NO
Jan Möbius's avatar
Jan Möbius committed
1334

1335 1336 1337 1338 1339
# A unique identifier for the Eclipse help plugin. When installing the plugin
# the directory name containing the HTML and XML files should also have this
# name. Each documentation set should have its own identifier.
# The default value is: org.doxygen.Project.
# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1340

1341
ECLIPSE_DOC_ID         = org.doxygen.Project
Jan Möbius's avatar
Jan Möbius committed
1342

1343 1344 1345 1346 1347 1348 1349 1350
# If you want full control over the layout of the generated HTML pages it might
# be necessary to disable the index and replace it with your own. The
# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
# of each HTML page. A value of NO enables the index and the value YES disables
# it. Since the tabs in the index contain the same information as the navigation
# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
1351 1352 1353 1354

DISABLE_INDEX          = NO

# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367
# structure should be generated to display hierarchical information. If the tag
# value is set to YES, a side panel will be generated containing a tree-like
# index structure (just like the one that is generated for HTML Help). For this
# to work a browser that supports JavaScript, DHTML, CSS and frames is required
# (i.e. any modern browser). Windows users are probably better off using the
# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
# further fine-tune the look of the index. As an example, the default style
# sheet generated by doxygen has an example that shows how to put an image at
# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
# the same information as the tab index, you could consider setting
# DISABLE_INDEX to YES when enabling this option.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1368

Jan Möbius's avatar
Jan Möbius committed
1369
GENERATE_TREEVIEW      = ALL
Jan Möbius's avatar
Jan Möbius committed
1370

1371 1372 1373 1374 1375 1376 1377
# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
# doxygen will group on one line in the generated HTML documentation.
#
# Note that a value of 0 will completely suppress the enum values from appearing
# in the overview section.
# Minimum value: 0, maximum value: 20, default value: 4.
# This tag requires that the tag GENERATE_HTML is set to YES.
1378 1379 1380

ENUM_VALUES_PER_LINE   = 4

1381 1382 1383 1384
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
# to set the initial width (in pixels) of the frame in which the tree is shown.
# Minimum value: 0, maximum value: 1500, default value: 250.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1385

Jan Möbius's avatar
Jan Möbius committed
1386
TREEVIEW_WIDTH         = 300
Jan Möbius's avatar
Jan Möbius committed
1387

1388 1389 1390 1391
# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
# external symbols imported via tag files in a separate window.
# The default value is: NO.
# This tag requires that the tag GENERATE_HTML is set to YES.
1392 1393 1394

EXT_LINKS_IN_WINDOW    = NO

1395 1396 1397 1398 1399 1400
# Use this tag to change the font size of LaTeX formulas included as images in
# the HTML documentation. When you change the font size after a successful
# doxygen run you need to manually remove any form_*.png images from the HTML
# output directory to force them to be regenerated.
# Minimum value: 8, maximum value: 50, default value: 10.
# This tag requires that the tag GENERATE_HTML is set to YES.
Jan Möbius's avatar
Jan Möbius committed
1401 1402 1403

FORMULA_FONTSIZE       = 10

1404
# Use the FORMULA_TRANPARENT tag to determine whether or not the images
1405 1406 1407 1408 1409 1410 1411
# generated for formulas are transparent PNGs. Transparent PNGs are not
# supported properly for IE 6.0, but are supported on all modern browsers.
#
# Note that when changing this option you need to delete any form_*.png files in
# the HTML output directory before the changes have effect.
# The default value is: YES.
# This tag requires that the tag GENERATE_HTML is set to YES.