CompositeT_impl.hh

Go to the documentation of this file.

/* ========================================================================= *
 *                                                                           *
 *                               OpenMesh                                    *
 *           Copyright (c) 2001-2023, RWTH-Aachen University                 *
 *           Department of Computer Graphics and Multimedia                  *
 *                          All rights reserved.                             *
 *                            www.openmesh.org                               *
 *                                                                           *
 *---------------------------------------------------------------------------*
 * This file is part of OpenMesh.                                            *
 *---------------------------------------------------------------------------*
 *                                                                           *
 * Redistribution and use in source and binary forms, with or without        *
 * modification, are permitted provided that the following conditions        *
 * are met:                                                                  *
 *                                                                           *
 * 1. Redistributions of source code must retain the above copyright notice, *
 *    this list of conditions and the following disclaimer.                  *
 *                                                                           *
 * 2. Redistributions in binary form must reproduce the above copyright      *
 *    notice, this list of conditions and the following disclaimer in the    *
 *    documentation and/or other materials provided with the distribution.   *
 *                                                                           *
 * 3. Neither the name of the copyright holder nor the names of its          *
 *    contributors may be used to endorse or promote products derived from   *
 *    this software without specific prior written permission.               *
 *                                                                           *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS       *
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED *
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A           *
 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER *
 * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  *
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,       *
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR        *
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    *
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING      *
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS        *
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.              *
 *                                                                           *
 * ========================================================================= */
 
//=============================================================================
//
//  CLASS CompositeT - IMPLEMENTATION
//
//=============================================================================
 
#define OPENMESH_SUBDIVIDER_ADAPTIVE_COMPOSITET_CC
 
 
//== INCLUDES =================================================================
 
#include <OpenMesh/Core/System/config.hh>
#include <OpenMesh/Core/System/omstream.hh>
#include <ostream>
#include <OpenMesh/Tools/Subdivider/Adaptive/Composite/CompositeT.hh>
#include <OpenMesh/Tools/Subdivider/Adaptive/Composite/RuleInterfaceT.hh>
 
 
//== NAMESPACE ================================================================
 
namespace OpenMesh   { // BEGIN_NS_OPENMESH
namespace Subdivider { // BEGIN_NS_DECIMATER
namespace Adaptive   { // BEGIN_NS_ADAPTIVE
 
 
//== IMPLEMENTATION ==========================================================
 
 
template<class M>
bool
CompositeT<M> ::
initialize( void )
{
  typename Mesh::VertexIter  v_it;
  typename Mesh::FaceIter    f_it;
  typename Mesh::EdgeIter    e_it;
  const typename Mesh::Point zero_point(0.0, 0.0, 0.0);
 
  // ---------------------------------------- Init Vertices
  for (v_it = mesh_.vertices_begin(); v_it != mesh_.vertices_end(); ++v_it)
  {
    mesh_.data(*v_it).set_state(0);
    mesh_.data(*v_it).set_final();
    mesh_.data(*v_it).set_position(0, mesh_.point(*v_it));
  }
 
  // ---------------------------------------- Init Faces
  for (f_it = mesh_.faces_begin(); f_it != mesh_.faces_end(); ++f_it)
  {
    mesh_.data(*f_it).set_state(0);
    mesh_.data(*f_it).set_final();
    mesh_.data(*f_it).set_position(0, zero_point);
  }
 
  // ---------------------------------------- Init Edges
  for (e_it = mesh_.edges_begin(); e_it != mesh_.edges_end(); ++e_it)
  {
    mesh_.data(*e_it).set_state(0);
    mesh_.data(*e_it).set_final();
    mesh_.data(*e_it).set_position(0, zero_point);
  }
 
 
  // ---------------------------------------- Init Rules
 
  int n_subdiv_rules_ = 0;
 
 
  // look for subdivision rule(s)
  for (size_t i=0; i < n_rules(); ++i) {
 
    if (rule_sequence_[i]->type()[0] == 'T' ||
        rule_sequence_[i]->type()[0] == 't')
    {
      ++n_subdiv_rules_;
      subdiv_rule_ = rule_sequence_[i];
      subdiv_type_ = rule_sequence_[i]->subdiv_type();
    }
  }
 
 
  // check for correct number of subdivision rules
  assert(n_subdiv_rules_ == 1);
 
  if (n_subdiv_rules_ != 1)
  {
    ::omerr() << "Error! More than one subdivision rules not allowed!\n";
    return false;
  }
 
  // check for subdivision type
  assert(subdiv_type_ == 3 || subdiv_type_ == 4);
 
  if (subdiv_type_ != 3 && subdiv_type_ != 4)
  {
    ::omerr() << "Error! Unknown subdivision type in sequence!" << std::endl;
    return false;
  }
 
  // set pointer to last rule
//   first_rule_ = rule_sequence_.front();
//   last_rule_  = rule_sequence_.back(); //[n_rules() - 1];
 
  // set numbers and previous rule
  for (size_t i = 0; i < n_rules(); ++i)
  {
    rule_sequence_[i]->set_subdiv_type(subdiv_type_);
    rule_sequence_[i]->set_n_rules(n_rules());
    rule_sequence_[i]->set_number(i);
    rule_sequence_[i]->set_prev_rule(rule_sequence_[(i+n_rules()-1)%n_rules()]);
    rule_sequence_[i]->set_subdiv_rule(subdiv_rule_);
  }
 
  return true;
}
 
 
// ----------------------------------------------------------------------------
#define MOBJ mesh_.deref
#define TVH  to_vertex_handle
#define HEH  halfedge_handle
#define NHEH next_halfedge_handle
#define PHEH prev_halfedge_handle
#define OHEH opposite_halfedge_handle
// ----------------------------------------------------------------------------
 
 
template<class M>
void CompositeT<M>::refine(typename M::FaceHandle& _fh)
{
  std::vector<typename Mesh::HalfedgeHandle> hh_vector;
 
  // -------------------- calculate new level for faces and vertices
  int new_face_level =
    t_rule()->number() + 1 +
    ((int)floor((float)(mesh_.data(_fh).state() - t_rule()->number() - 1)/n_rules()) + 1) * n_rules();
 
  int new_vertex_level =
    new_face_level + l_rule()->number() - t_rule()->number();
 
  // -------------------- store old vertices
  // !!! only triangle meshes supported!
  typename Mesh::VertexHandle vh[3];
 
  vh[0] = mesh_.TVH(mesh_.HEH(_fh));
  vh[1] = mesh_.TVH(mesh_.NHEH(mesh_.HEH(_fh)));
  vh[2] = mesh_.TVH(mesh_.PHEH(mesh_.HEH(_fh)));
 
  // save handles to incoming halfedges for getting the new vertices
  // after subdivision (1-4 split)
  if (subdiv_type_ == 4)
  {
    hh_vector.clear();
 
    // green face
    if (mesh_.data(_fh).final())
    {
      typename Mesh::FaceHalfedgeIter fh_it(mesh_.fh_iter(_fh));
 
      for (; fh_it.is_valid(); ++fh_it)
      {
        hh_vector.push_back(mesh_.PHEH(mesh_.OHEH(*fh_it)));
      }
    }
 
    // red face
    else
    {
 
      typename Mesh::HalfedgeHandle red_hh(mesh_.data(_fh).red_halfedge());
 
      hh_vector.push_back(mesh_.PHEH(mesh_.OHEH(mesh_.NHEH(red_hh))));
      hh_vector.push_back(mesh_.PHEH(mesh_.OHEH(mesh_.PHEH(mesh_.OHEH(red_hh)))));
    }
  }
 
 
  // -------------------- Average rule before topo rule?
  if (t_rule()->number() > 0)
    t_rule()->prev_rule()->raise(_fh, new_face_level-1);
 
  // -------------------- Apply topological operator first
  t_rule()->raise(_fh, new_face_level);
 
#if 0 // original code
  assert(MOBJ(_fh).state() >=
         subdiv_rule_->number()+1+(int) (MOBJ(_fh).state()/n_rules())*n_rules());
#else // improved code (use % operation and avoid floating point division)
  assert( mesh_.data(_fh).state() >= ( t_rule()->number()+1+generation(_fh) ) );
#endif
 
  // raise new vertices to final levels
  if (subdiv_type_ == 3)
  {
    typename Mesh::VertexHandle new_vh(mesh_.TVH(mesh_.NHEH(mesh_.HEH(_fh))));
 
    // raise new vertex to final level
    l_rule()->raise(new_vh, new_vertex_level);
  }
 
  if (subdiv_type_ == 4)
  {
    typename Mesh::HalfedgeHandle hh;
    typename Mesh::VertexHandle   new_vh;
 
    while (!hh_vector.empty()) {
 
      hh = hh_vector.back();
      hh_vector.pop_back();
 
      // get new vertex
      new_vh = mesh_.TVH(mesh_.NHEH(hh));
 
      // raise new vertex to final level
      l_rule()->raise(new_vh, new_vertex_level);
    }
  }
 
  // raise old vertices to final position
  l_rule()->raise(vh[0], new_vertex_level);
  l_rule()->raise(vh[1], new_vertex_level);
  l_rule()->raise(vh[2], new_vertex_level);
}
 
 
// ----------------------------------------------------------------------------
 
 
template<class M>
void CompositeT<M>::refine(typename M::VertexHandle& _vh)
{
  // calculate next final level for vertex
  int new_vertex_state = generation(_vh) + l_rule()->number() + 1;
 
  // raise vertex to final position
  l_rule()->raise(_vh, new_vertex_state);
}
 
 
// ----------------------------------------------------------------------------
 
 
template <class M>
std::string CompositeT<M>::rules_as_string(const std::string& _sep) const
{
  std::string seq;
  typename RuleSequence::const_iterator it = rule_sequence_.begin();
 
  if ( it != rule_sequence_.end() )
  {
    seq = (*it)->type();
    for (++it; it != rule_sequence_.end(); ++it )
    {
      seq += _sep;
      seq += (*it)->type();
    }
  }
  return seq;
}
 
// ----------------------------------------------------------------------------
#undef MOBJ
#undef TVH
#undef HEH
#undef NHEH
#undef PHEH
#undef OHEH
//=============================================================================
} // END_NS_ADAPTIVE
} // END_NS_SUBDIVIDER
} // END_NS_OPENMESH
//=============================================================================